EUDR ToolsБезплатни публични инструменти за вносители от ЕС
Библиотека за обхват по ХС/КН
Справочник за кодчугун, желязо и стомана

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon, of rectangular (excl. square) cross-section rolled on four faces "ECSC" (excl. those of free-cutting steel)

Датиран по източник справочник за ХС/КН код 72145010, основанието му за обхват по EUDR, йерархията в КН, последиците за доказателствата и свързаните индексирани редове.

Вид справкаСправочен запис за обхват по ХС/КН
Решение за обхватаOut of scope
Последица за вносителяСамо справочна бележка
Година на КН2026
Справочен отговор

ХС/КН код 72145010 е извън обхват за подготовка по EUDR.

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon, of rectangular (excl. square) cross-section rolled on four faces "ECSC" (excl. those of free-cutting steel) Индексираният двигател за обхват връща Out of scope за този код. No Annex I scope match was found for this indexed CN code.

Основание за обхвата

Защо тази справочна страница дава този отговор.

Описание на кода
Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon, of rectangular (excl. square) cross-section rolled on four faces "ECSC" (excl. those of free-cutting steel)
Основание в Приложение I
Няма пряк запис в Приложение I
Основание от източника
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Йерархия на КН

Родителски, дъщерни и близки редове.

Изгледът в библиотеката е за справочна навигация. Използвайте проверката, когато искате да изпълните друг код като действие.

72чугун, желязо и стоманаout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out721450other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out72145031other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring >= 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145039other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring < 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145090other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of rectangular "including square" cross-section or of other than rectangular or circular cross-section "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145091other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel)out72145099other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is < 80 mm 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out
Модел на доказателствата

Какво означава това за подготовката.

Този ред не е пряк спусък за събиране на доказателства в текущия резултат за обхвата.

Метаданни на източника
Нужен ви е бърз изглед за действие?Изпълнете същия код в проверката на обхват по ХС.
Отворете резултата от инструмента
72145010 — справочник за обхват по ХС/КН на EUDR | EUDR Tools