EUDR ToolsBezplatné veřejné nástroje pro dovozce do EU
Knihovna oblasti působnosti HS/KN
Reference kóduželezo a ocel

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is < 80 mm 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)

Reference s datovanými zdroji pro kód HS/KN 72145099, jeho základ v oblasti působnosti EUDR, hierarchii KN, dopady na doklady a související indexované řádky.

Typ referenceZáznam oblasti působnosti HS/KN
Rozhodnutí o oblasti působnostiOut of scope
Dopad na dovozcePouze referenční poznámka
Rok KN2026
Referenční odpověď

Kód HS/KN 72145099 je pro přípravu na EUDR mimo oblast působnosti.

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is < 80 mm 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel) Indexovaný nástroj oblasti působnosti vrací pro tento kód výsledek Out of scope. No Annex I scope match was found for this indexed CN code.

Základ oblasti působnosti

Proč tato referenční stránka dává právě tuto odpověď.

Popis kódu
Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is < 80 mm 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)
Základ v příloze I
Bez přímé položky v příloze I
Zdrojový základ
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Hierarchie KN

Nadřazené, podřazené a sousední řádky.

Knihovní zobrazení slouží k referenční navigaci. Chcete-li spustit další kód jako akci, použijte kontrolu.

72železo a ocelout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out721450other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out72145010other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon, of rectangular (excl. square) cross-section rolled on four faces "ecsc" (excl. those of free-cutting steel)out72145031other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring >= 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145039other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring < 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145090other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of rectangular "including square" cross-section or of other than rectangular or circular cross-section "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145091other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel)out
Vzor dokladů

Co to znamená pro přípravu.

Tento řádek není v aktuálním výsledku oblasti působnosti přímým spouštěčem shromažďování dokladů.

Metadata zdrojů
Potřebujete rychlé akční zobrazení?Spusťte stejný kód v kontrole oblasti působnosti HS.
Otevřít výsledek nástroje
72145099 — reference oblasti působnosti HS/KN pro EUDR | EUDR Tools