EUDR ToolsBezplatné veřejné nástroje pro dovozce do EU
Knihovna oblasti působnosti HS/KN
Reference kóduželezo a ocel

Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)

Reference s datovanými zdroji pro kód HS/KN 72285040, jeho základ v oblasti působnosti EUDR, hierarchii KN, dopady na doklady a související indexované řádky.

Typ referenceZáznam oblasti působnosti HS/KN
Rozhodnutí o oblasti působnostiOut of scope
Dopad na dovozcePouze referenční poznámka
Rok KN2026
Referenční odpověď

Kód HS/KN 72285040 je pro přípravu na EUDR mimo oblast působnosti.

Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) Indexovaný nástroj oblasti působnosti vrací pro tento kód výsledek Out of scope. No Annex I scope match was found for this indexed CN code.

Základ oblasti působnosti

Proč tato referenční stránka dává právě tuto odpověď.

Popis kódu
Bars and rods of steel containing 0,9% to 1,15% of carbon, 0,5% to 2% of chromium and, if present <= 0,5% of molybdenum, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
Základ v příloze I
Bez přímé položky v příloze I
Zdrojový základ
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Hierarchie KN

Nadřazené, podřazené a sousední řádky.

Knihovní zobrazení slouží k referenční navigaci. Chcete-li spustit další kód jako akci, použijte kontrolu.

72železo a ocelout7228other bars and rods of alloy steel other than stainless, angles, shapes and sections of alloy steel other than stainless, n.e.s.; hollow drill bars and rods, of alloy or non-alloy steelout722850bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)out72285000bars and rods of alloy steel other than stainless, not further worked than cold-formed or cold-finished (excl. products of high-speed steel or silico-manganese steel)out72285010bars and rods of alloy steel, (excl. stainless, high speed or silico-manganese), of circular cross-section of a diameter >= 80 mm, simply cold-formed or cold-finishedout72285020bars and rods of tool steel, only cold-formed or cold-finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)out72285061bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of >= 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)out72285069bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of circular cross-section, of a diameter of < 80 mm (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)out72285070bars and rods of alloy steel, other than stainless steel, not further worked than cold-formed or cold-finished, of rectangular "other than square" cross-section, rolled on four faces (excl. of high-speed steel, silico-manganese steel, tool steel, articles of subheading 7228.50.40, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)out
Vzor dokladů

Co to znamená pro přípravu.

Tento řádek není v aktuálním výsledku oblasti působnosti přímým spouštěčem shromažďování dokladů.

Metadata zdrojů
Potřebujete rychlé akční zobrazení?Spusťte stejný kód v kontrole oblasti působnosti HS.
Otevřít výsledek nástroje
72285040 — reference oblasti působnosti HS/KN pro EUDR | EUDR Tools