HS/KN-kode 7208 er ikke omfattet til EUDR-forberedelse.
Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated Den indekserede anvendelsesområde-motor returnerer Out of scope for denne kode. No Annex I scope match was found for this indexed CN code.
Hvorfor denne referenceside giver dette svar.
- Kodebeskrivelse
- Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated
- Bilag I-grundlag
- Ingen direkte bilag I-post
- Kildegrundlag
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Overordnet, underordnet og nærliggende rækker.
Biblioteksvisningen er til referencenavigation. Brug tjekkeren, når du vil køre en anden kode som en handling.
72jern og stålout720810flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling processout720811flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm and having a minimum yield point of 355 mpa "ecsc"out720812flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 4,75 mm and <= 10 mm and having a minimum yield point of 355 mpaout720813flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 3 mm and <= 4,75 mm and having a minimum yield point of 355 mpaout720814flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness < 3 mm and having a minimum yield point of 275 mpaout720821flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness > 10 mm and having a minimum yield point of < 355 mpa "ecsc"out720822flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 4,75 mm and <= 10 mm and having a minimum yield point of < 355 mpaout720823flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 3 mm and < 4,75 mm and having a minimum yield point of < 355 mpaout720824flat-rolled products of iron or non-alloy steel, of a width > 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness < 3 mm and having a minimum yield point of < 275 mpaout720825flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in reliefout7201pig iron and spiegeleisen, in pigs, blocks or other primary formsout7202ferro-alloysout7203ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar formsout7204ferrous waste and scrap; remelting scrap ingots of iron or steel (excl. slag, scale and other waste from the production of iron or steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen)out7205granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings)out7206iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203)out
Hvad dette betyder for forberedelsen.
Denne række udløser ikke direkte indsamling af dokumentation i det aktuelle anvendelsesområde-resultat.
Regulation (EU) 2023/1115 Annex I — relevant productshentet 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hentet 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hentet 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hentet 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hentet 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghentet 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershentet 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hentet 2026-08-08