HS/KN-kode 720934 er ikke omfattet til EUDR-forberedelse.
Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness < 0,5.mm and having a minimum yield point of 275 MPa "ECSC" Den indekserede anvendelsesområde-motor returnerer Out of scope for denne kode. No Annex I scope match was found for this indexed CN code.
Hvorfor denne referenceside giver dette svar.
- Kodebeskrivelse
- Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness < 0,5.mm and having a minimum yield point of 275 MPa "ECSC"
- Bilag I-grundlag
- Ingen direkte bilag I-post
- Kildegrundlag
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Overordnet, underordnet og nærliggende rækker.
Biblioteksvisningen er til referencenavigation. Brug tjekkeren, når du vil køre en anden kode som en handling.
72jern og stålout7209flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coatedout72093410flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, other than in coils, simply cold-rolled, of a thickness of > 1 mm but < 3 mm, and having a minimum yield point of 275 mpa "ecsc" "electrical"out72093490flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, other than in coils, simply cold-rolled, not clad, plated or coated, of a thickness of < 0,5 mm, and having a minimum yield point of 275 mpa "ecsc" (excl. electrical)out720911flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled, not clad, plated or coated, of a thickness of >= 3 mm and having a minimum yield point of 355 mpa "ecsc"out720912flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness > 1 mm and < 3 mm and having a minimum yield point of 275 mpa "ecsc"out720913flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness >= 0,5 mm, and <= 1 mm and having a minimum yield point of 275 mpa "ecsc"out720914flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness < 0,5 mm and having a minimum yield point of 275 mpa "ecsc"out720915flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mmout720916flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of > 1 mm but < 3 mmout
Hvad dette betyder for forberedelsen.
Denne række udløser ikke direkte indsamling af dokumentation i det aktuelle anvendelsesområde-resultat.
Regulation (EU) 2023/1115 Annex I — relevant productshentet 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hentet 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hentet 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hentet 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hentet 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghentet 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershentet 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hentet 2026-08-08