HS/KN-kode 72111910 er ikke omfattet til EUDR-forberedelse.
Flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600mm, simply hot-rolled, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm but < 4.75mm, and having a minimum yield point of 355 MPa "ECSC" (excl. universal plate) Den indekserede anvendelsesområde-motor returnerer Out of scope for denne kode. No Annex I scope match was found for this indexed CN code.
Hvorfor denne referenceside giver dette svar.
- Kodebeskrivelse
- Flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600mm, simply hot-rolled, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm but < 4.75mm, and having a minimum yield point of 355 MPa "ECSC" (excl. universal plate)
- Bilag I-grundlag
- Ingen direkte bilag I-post
- Kildegrundlag
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Overordnet, underordnet og nærliggende rækker.
Biblioteksvisningen er til referencenavigation. Brug tjekkeren, når du vil køre en anden kode som en handling.
72jern og stålout7211flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coatedout721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out72111900flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out72111920flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness of < 4,75 mm (excl. "wide flats")out72111990flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply hot-rolled, not clad, plated or coated, of a thickness of < 4,75 mm (excl. "wide flats")out72111991flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply hot-rolled, of a thickness of >= 3 mm but < 4.75mm, and having a minimum yield point of 355 mpa "ecsc" (excl. universal plate)out72111999flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply hot-rolled, of a thickness of < 3 mm, and having a minimum yield point of 275 mpa "ecsc"out
Hvad dette betyder for forberedelsen.
Denne række udløser ikke direkte indsamling af dokumentation i det aktuelle anvendelsesområde-resultat.
Regulation (EU) 2023/1115 Annex I — relevant productshentet 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hentet 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hentet 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hentet 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hentet 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghentet 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershentet 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hentet 2026-08-08