Flat-rolled products of non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa, not further worked than surface-treated "ECSC"

HS/KN-kode 72122111 er ikke omfattet til EUDR-forberedelse.

Flat-rolled products of non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa, not further worked than surface-treated "ECSC" Den indekserede anvendelsesområde-motor returnerer Out of scope for denne kode. No Annex I scope match was found for this indexed CN code.

Hvorfor denne referenceside giver dette svar.

Kodebeskrivelse

Flat-rolled products of non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa, not further worked than surface-treated "ECSC"

Bilag I-grundlag

Ingen direkte bilag I-post

Kildegrundlag

Regulation (EU) 2023/1115 Annex I and CN 2026 index

Overordnet, underordnet og nærliggende rækker.

Biblioteksvisningen er til referencenavigation. Brug tjekkeren, når du vil køre en anden kode som en handling.

Hvad dette betyder for forberedelsen.

Denne række udløser ikke direkte indsamling af dokumentation i det aktuelle anvendelsesområde-resultat.