HS/KN-kode 721440 er ikke omfattet til EUDR-forberedelse.
Other bars and rods of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon "ECSC" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel) Den indekserede anvendelsesområde-motor returnerer Out of scope for denne kode. No Annex I scope match was found for this indexed CN code.
Hvorfor denne referenceside giver dette svar.
- Kodebeskrivelse
- Other bars and rods of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon "ECSC" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)
- Bilag I-grundlag
- Ingen direkte bilag I-post
- Kildegrundlag
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Overordnet, underordnet og nærliggende rækker.
Biblioteksvisningen er til referencenavigation. Brug tjekkeren, når du vil køre en anden kode som en handling.
72jern og stålout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out72144010other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, containing by weight < 0,25% of carbon, of rectangular (excl. square) cross-section, rolled on four faces "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out72144020bars and rods of the type used for reinforced concrete, smooth, of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of square cross-section or of a cross-section other than rectangular or circular (ecsc)out72144031other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight =< 0.25% carbon, of circular cross-section measuring not more than >= 80 mm diameter 'ecsc' (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72144039other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight =< 0.25% carbon, of circular cross-section measuring not more than < 80 mm diameter 'ecsc' (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72144051bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section, of a maximum diameter of >= 80 mm (ecsc) (other than of free-cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72144059bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (ecsc) (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72144080bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (ecsc) (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72144090other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0.25% carbon, of rectangular 'including square' cross-section or of other than rectangular or circular cross-section 'ecsc' (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72144091other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of square or other (excl. other rectangular) cross-section measuring >= 80 mm in diameter 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out72144099other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of square or other (excl. other rectangular) cross-section measuring < 80 mm in diameter 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721410bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils)out721420bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling processout721430bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling)out721450other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721460other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721491bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel)out
Hvad dette betyder for forberedelsen.
Denne række udløser ikke direkte indsamling af dokumentation i det aktuelle anvendelsesområde-resultat.
Regulation (EU) 2023/1115 Annex I — relevant productshentet 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hentet 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hentet 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hentet 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hentet 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghentet 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershentet 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hentet 2026-08-08