HS/KN-kode 730660 er ikke omfattet til EUDR-forberedelse.
Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel (excl. seamless, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) Den indekserede anvendelsesområde-motor returnerer Out of scope for denne kode. No Annex I scope match was found for this indexed CN code.
Hvorfor denne referenceside giver dette svar.
- Kodebeskrivelse
- Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel (excl. seamless, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)
- Bilag I-grundlag
- Ingen direkte bilag I-post
- Kildegrundlag
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Overordnet, underordnet og nærliggende rækker.
Biblioteksvisningen er til referencenavigation. Brug tjekkeren, når du vil køre en anden kode som en handling.
73varer af jern eller stålout7306tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm)out73066010tubes, pipes and hollow profiles, welded, having a non-circular cross-section, of iron or steel, with attached fittings, for gases or liquids, for civil aircraft (excl. seamless)out73066011tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel, with a wall thickness of <= 2 mm (excl. seamless)out73066019tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm (excl. seamless and of cast iron)out73066021tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel, with a wall thickness of > 2 mm (excl. seamless)out73066029tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm (excl. seamless)out73066031tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel, with a wall thickness of <= 2 mm (excl. seamless and of cast iron)out73066032tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel, with a wall thickness of <= 2 mm (excl. seamless)out73066034tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm (excl. seamless and of cast iron)out73066036tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel, with a wall thickness of > 2 mm (excl. seamless)out73066038tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm (excl. seamless)out730610line pipe of a kind used for oil or gas pipelines, of iron or steel, of an external diameter of <= 406,4 mm (excl. of cast iron and seamless tubes)out730611line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mmout730619line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)out730620casing and tubing of a kind used in drilling for oil or gas, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. of cast iron and seamless tubes)out730621casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mmout730629casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)out
Hvad dette betyder for forberedelsen.
Denne række udløser ikke direkte indsamling af dokumentation i det aktuelle anvendelsesområde-resultat.
Regulation (EU) 2023/1115 Annex I — relevant productshentet 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hentet 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hentet 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hentet 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hentet 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghentet 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershentet 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hentet 2026-08-08