EUDR ToolsKostenlose öffentliche Tools für EU-Importeure
HS-/KN-Geltungsbereichs-Bibliothek
Code-Referenzkunststoffe und waren daraus

Strip of polymers of propylene of a thickness of > 0,10 mm and a width of > 5 mm to 20 mm, of the kind used for packaging (excl. self-adhesive and decorative strip)

Quellendatierte Referenz für den HS-/KN-Code 39202079: EUDR-Geltungsbereichsgrundlage, KN-Hierarchie, Auswirkungen auf die Nachweise und verwandte indexierte Zeilen.

ReferenztypHS-/KN-Geltungsbereichseintrag
Geltungsbereichs-EntscheidungOut of scope
Bedeutung für ImporteureNur Referenzhinweis
KN-Jahr2026
Referenzantwort

HS-/KN-Code 39202079 ist für die EUDR-Vorbereitung außerhalb des Geltungsbereichs.

Strip of polymers of propylene of a thickness of > 0,10 mm and a width of > 5 mm to 20 mm, of the kind used for packaging (excl. self-adhesive and decorative strip) Die indexierte Scope-Engine liefert für diesen Code das Ergebnis Out of scope. No Annex I scope match was found for this indexed CN code.

Geltungsbereichsgrundlage

Warum diese Referenzseite diese Antwort gibt.

Code-Beschreibung
Strip of polymers of propylene of a thickness of > 0,10 mm and a width of > 5 mm to 20 mm, of the kind used for packaging (excl. self-adhesive and decorative strip)
Anhang-I-Grundlage
Kein direkter Anhang-I-Eintrag
Quellengrundlage
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-Hierarchie

Übergeordnete, untergeordnete und benachbarte Zeilen.

Die Bibliotheksansicht dient der Referenznavigation. Nutzen Sie die HS-Code-Prüfung, wenn Sie einen weiteren Code aktiv prüfen möchten.

39kunststoffe und waren darausout3920plates, sheets, film, foil and strip, of non-cellular plastics, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918)out392020plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918)out39202010plates, sheets, foil, film and strip of unexpanded polymers of propylene, not reinforced, coated, laminated or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles, with a thickness of < 0.05 mm (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918)out39202021plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of <= 0,10 mm, biaxially oriented (excl. self-adhesive and wall or ceiling coverings of chapter no 3918)out39202029plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of <= 0,10 mm, not biaxially orientedout39202050plates, sheets, foil, film and strip of expanded polymers of propylene, not reinforced, coated, laminated or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles, with a thickness of 0.05 to 0.01 mm (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918)out39202071decorative strip of polymers of propylene, of a thickness of > 0,10 mm and a width of > 5 mm to 20 mm, of the kind used for packaging (excl. self-adhesive)out39202080plates, sheets, film, foil and strip, of non-cellular polymers of propylene, not reinforced, laminated, supported or similarly combined with other materials, not further worked or only surface-worked and not cut to shapes other than rectangular "incl. square" of a thickness of > 0,10 mm, n.e.s.out
Nachweismuster

Was das für die Vorbereitung bedeutet.

Diese Zeile ist im aktuellen Geltungsbereichs-Ergebnis kein direkter Auslöser für die Nachweiserhebung.

Quellen-Metadaten
Sie brauchen die schnelle Aktionsansicht?Führen Sie denselben Code in der HS-Code-Prüfung aus.
Tool-Ergebnis öffnen
39202079 EUDR-HS-/KN-Geltungsbereichsreferenz | EUDR Tools