HS-/KN-Code 72081310 ist für die EUDR-Vorbereitung außerhalb des Geltungsbereichs.
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 3 mm but < 4,75 mm and having a minimum yield point of 355 MPa "ECSC", intended for re-rolling Die indexierte Scope-Engine liefert für diesen Code das Ergebnis Out of scope. No Annex I scope match was found for this indexed CN code.
Warum diese Referenzseite diese Antwort gibt.
- Code-Beschreibung
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 3 mm but < 4,75 mm and having a minimum yield point of 355 MPa "ECSC", intended for re-rolling
- Anhang-I-Grundlage
- Kein direkter Anhang-I-Eintrag
- Quellengrundlage
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Übergeordnete, untergeordnete und benachbarte Zeilen.
Die Bibliotheksansicht dient der Referenznavigation. Nutzen Sie die HS-Code-Prüfung, wenn Sie einen weiteren Code aktiv prüfen möchten.
72eisen und stahlout7208flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coatedout720813flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 3 mm and <= 4,75 mm and having a minimum yield point of 355 mpaout72081391flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4,75 mm and having a minimum yield point of 355 mpa, with patterns in relief directly due to the rolling process "ecsc" (excl. products intended for re-rolling)out72081395flat-rolled products in coils, simply hot-rolled, of high resitance steel, of a thickness >= 3 mm but < 4,75 mm, of a width >= 600 mm, pickled (excl. 7208.13.10 and 7208.13.91)out72081398flat-rolled products in coils, simply hot-rolled, of high resistance steel, of a thickness >= 3 mm but < 4,75 mm, of a width >= 600 mm (excl. 7208.13.10 to 7208.13.95)out72081399flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 3 mm but < 4.75 mm and having a minimum yield point of 355 mpa, without patterns in relief 'ecsc' (excl. products intended for re-rolling)out
Was das für die Vorbereitung bedeutet.
Diese Zeile ist im aktuellen Geltungsbereichs-Ergebnis kein direkter Auslöser für die Nachweiserhebung.
Regulation (EU) 2023/1115 Annex I — relevant productsabgerufen am 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115abgerufen am 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)abgerufen am 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)abgerufen am 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8abgerufen am 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingabgerufen am 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradersabgerufen am 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)abgerufen am 2026-08-08