Flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc (excl. products not further worked than surface-treated "ECSC" and products of steel of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa)

HS-/KN-Code 72122919 ist für die EUDR-Vorbereitung außerhalb des Geltungsbereichs.

Flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc (excl. products not further worked than surface-treated "ECSC" and products of steel of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa) Die indexierte Scope-Engine liefert für diesen Code das Ergebnis Out of scope. No Annex I scope match was found for this indexed CN code.

Warum diese Referenzseite diese Antwort gibt.

Code-Beschreibung

Flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc (excl. products not further worked than surface-treated "ECSC" and products of steel of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa)

Anhang-I-Grundlage

Kein direkter Anhang-I-Eintrag

Quellengrundlage

Regulation (EU) 2023/1115 Annex I and CN 2026 index

Übergeordnete, untergeordnete und benachbarte Zeilen.

Die Bibliotheksansicht dient der Referenznavigation. Nutzen Sie die HS-Code-Prüfung, wenn Sie einen weiteren Code aktiv prüfen möchten.

Was das für die Vorbereitung bedeutet.

Diese Zeile ist im aktuellen Geltungsbereichs-Ergebnis kein direkter Auslöser für die Nachweiserhebung.