EUDR ToolsTasuta avalikud tööriistad ELi importijatele
HS/KN-kohaldamisala teatmik
Koodi teatmekirjepuit ja puittooted; puusüsi

Tropical wood, sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. planed, sanded or end-jointed, and tropical wood specified in Subheading Note 2 to this chapter)

Allika kuupäevaga teatmekirje HS/KN-koodi 44079996 kohta: EUDR-i kohaldamisala alus, KN-hierarhia, mõju tõenditele ja seotud indekseeritud read.

Teatmiku tüüpHS/KN-kohaldamisala kirje
Kohaldamisala otsusPartly in scope
Mõju importijaleKäivitab tõendite kogumise
KN aasta2026
Teatmevastus

HS/KN-kood 44079996 on EUDR-i ettevalmistuse seisukohast osaliselt hõlmatud.

Tropical wood, sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. planed, sanded or end-jointed, and tropical wood specified in Subheading Note 2 to this chapter) Indekseeritud kohaldamisala mootor tagastab selle koodi kohta tulemuse Partly in scope. 'ex' entry: only the relevant commodity part of this heading is in scope. Product-level review is required.

Kohaldamisala alus

Miks see teatmeleht annab sellise vastuse.

Koodi kirjeldus
Tropical wood, sawn or chipped lengthwise, sliced or peeled, of a thickness of > 6 mm (excl. planed, sanded or end-jointed, and tropical wood specified in Subheading Note 2 to this chapter)
I lisa alus
Wood sawn or chipped lengthwise, thicker than 6 mm (not including used products and second-hand products)
Allika alus
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-hierarhia

Üle-, alam- ja lähedased read.

Teatmiku vaade on mõeldud teatmeandmetes liikumiseks. Kui soovite toiminguna kontrollida mõnda muud koodi, kasutage kontrolli tööriista.

44puit ja puittooted; puusüsinarrower4407pikikiudu saetud või lõhestatud, spoonihööveldatud või -kooritud puit, hööveldatud, lihvitud, pikijätkatud või mitte, paksusega üle 6 mmpartial440799pikikiudu saetud või lõhestatud, spoonihööveldatud või -kooritud puit, hööveldatud, lihvitud, pikijätkatud või mitte, paksusega üle 6 mm — muudpartial44079910wood sawn or cut lengthwise, sliced or peeled, end-jointed, of a thickness of > 6 mm, end-jointed, whether or not planed or sanded (excl. tropical wood specified in subheading note 1 to this chapter, coniferous wood, oak "quercus spp." and beech "fagus spp.")(2002-2006);wood sawn or cut lengthwise, sliced or peeled, finger-jointed, of a thickness > 6 mm, finger-jointed, whether or not planed or sanded (excl. tropical wood specified in subheading note 1 to this chapter, coniferous wood, oak "quercus spp." and beech "fagus spp.")(1996-2001);wood, sawn or cut lengthwise, sliced or barked, with a thickness of > 6 mm, finger-jointed, whether or not planned or sanded (excl. tropical wood of subheadings 4407.21 to 4407.23, coniferous wood, oak 'quercus spp.' and beech 'fagus spp.')(1988-1989)partial44079911palissandre du bresil or bois de rose femelle, sawn or chipped lengthwise, sliced or peeled, finger-jointed, of a thickness > 6 mmpartial44079919wood sawn or chipped lengthwise, sliced or peeled, finger-jointed, of a thickness > 6 mm (excl. 4407.10.10 to 4407.99.11)partial44079920wood sawn or cut lengthwise, sliced or peeled, end-jointed, of a thickness of > 6 mm, end-jointed, whether or not planed or sanded (excl. tropical wood specified in subheading note 1 to this chapter, coniferous wood, oak "quercus spp.", beech "fagus spp.", maple "acer spp.", cherry "prunus spp." and ash "fraxinus spp.")partial44079925wood sawn or cut lengthwise, sliced or peeled, planed, of a thickness of > 6 mm (excl. end-jointed; tropical wood specified in subheading note 1 to this chapter, coniferous wood, oak "quercus spp.", beech "fagus spp.", maple "acer spp.", cherry "prunus spp." and ash "fraxinus spp.")partial44079927pikikiudu saetud või lõhestatud, spoonihööveldatud või -kooritud puit, hööveldatud, lihvitud, pikijätkatud või mitte, paksusega üle 6 mm — muud — hööveldatud; pikijätkatud, hööveldatud või hööveldamata, lihvitud või lihvimatapartial
Tõendite muster

Mida importijad tavaliselt järgmisena ette valmistavad.

  • Tootekirjeldus
  • Kogus
  • Tootjariik
  • Maatüki asukohatuvastus
  • Tarnija andmed
  • Seaduslikkuse tõendid
  • Raadamisvabaduse tõendamine
Tootega seotud hoiatused

Küsimused, millele HS/KN-kood üksi vastata ei saa.

Kas toode on valmistatud täielikult materjalist, mis on olelusringi läbinud ja mis muul juhul kõrvaldataks jäätmetena?Kui jah: kohaldamisalast väljas

Tootmisprotsessi kõrvalsaadustele see erand ei laiene — kui protsessis kasutati materjali, mis ei olnud jäätmed, jääb toode kohaldamisalasse.

I lisa sissejuhatav lõik; direktiivi 2008/98/EÜ artikli 3 punkt 1
Is it a sample of negligible value and quantity used only to solicit orders, or a product sent for examination or testing that is used up, destroyed or returned?Kui jah: kohaldamisalast väljasDelegated Regulation (EU) 2026/2102, Annex (5), table note to 'Relevant products'
Is it a used or second-hand product?Kui jah: kohaldamisalast väljasDelegated Regulation (EU) 2026/2102, Annex (u), (x), (z), (dd), (ee), (gg), (hh), (jj)–(vv), (ww) and (yy)–(zz) — note that (bb) 4401, (cc) 4402, (ff) 4405 and (ii) 4408 carry packing-material and waste carve-outs instead, not a used or second-hand carve-out
Is it made of bamboo, rattan or another material of a woody nature?Kui jah: kohaldamisalast väljasDelegated Regulation (EU) 2026/2102, Annex (4)
Allika metaandmed
Vajate kiiret toimingu vaadet?Kontrollige sama koodi HS-kohaldamisala kontrolli tööriistas.
Ava tööriista tulemus
44079996 EUDR-i HS/KN-kohaldamisala teatmik | EUDR Tools