EUDR ToolsTasuta avalikud tööriistad ELi importijatele
HS/KN-kohaldamisala teatmik
Koodi teatmekirjeraud ja teras

Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coated

Allika kuupäevaga teatmekirje HS/KN-koodi 720990 kohta: EUDR-i kohaldamisala alus, KN-hierarhia, mõju tõenditele ja seotud indekseeritud read.

Teatmiku tüüpHS/KN-kohaldamisala kirje
Kohaldamisala otsusOut of scope
Mõju importijaleAinult teatmemärkus
KN aasta2026
Teatmevastus

HS/KN-kood 720990 on EUDR-i ettevalmistuse seisukohast kohaldamisalast väljas.

Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coated Indekseeritud kohaldamisala mootor tagastab selle koodi kohta tulemuse Out of scope. No Annex I scope match was found for this indexed CN code.

Kohaldamisala alus

Miks see teatmeleht annab sellise vastuse.

Koodi kirjeldus
Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coated
I lisa alus
Otsene I lisa kanne puudub
Allika alus
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-hierarhia

Üle-, alam- ja lähedased read.

Teatmiku vaade on mõeldud teatmeandmetes liikumiseks. Kui soovite toiminguna kontrollida mõnda muud koodi, kasutage kontrolli tööriista.

72raud ja terasout7209flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coatedout72099000flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coatedout72099010flat-rolled products of iron or non-alloy steel, cold-rolled "cold-reduced", not clad, plated or coated, not further worked than surface-treated, or simply cut into shapes other than square or rectangularout72099020flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, perforatedout72099080flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, non-perforatedout72099090flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated (excl. products cut into shapes other than square or rectangular)out720911flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled, not clad, plated or coated, of a thickness of >= 3 mm and having a minimum yield point of 355 mpa "ecsc"out720912flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness > 1 mm and < 3 mm and having a minimum yield point of 275 mpa "ecsc"out720913flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness >= 0,5 mm, and <= 1 mm and having a minimum yield point of 275 mpa "ecsc"out720914flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness < 0,5 mm and having a minimum yield point of 275 mpa "ecsc"out720915flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mmout720916flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of > 1 mm but < 3 mmout
Tõendite muster

Mida see ettevalmistuse jaoks tähendab.

See rida ei käivita praeguse kohaldamisala tulemuse kohaselt otseselt tõendite kogumist.

Allika metaandmed
Vajate kiiret toimingu vaadet?Kontrollige sama koodi HS-kohaldamisala kontrolli tööriistas.
Ava tööriista tulemus
720990 EUDR-i HS/KN-kohaldamisala teatmik | EUDR Tools