EUDR ToolsTasuta avalikud tööriistad ELi importijatele
HS/KN-kohaldamisala teatmik
Koodi teatmekirjeraud ja teras

Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc)

Allika kuupäevaga teatmekirje HS/KN-koodi 721041 kohta: EUDR-i kohaldamisala alus, KN-hierarhia, mõju tõenditele ja seotud indekseeritud read.

Teatmiku tüüpHS/KN-kohaldamisala kirje
Kohaldamisala otsusOut of scope
Mõju importijaleAinult teatmemärkus
KN aasta2026
Teatmevastus

HS/KN-kood 721041 on EUDR-i ettevalmistuse seisukohast kohaldamisalast väljas.

Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc) Indekseeritud kohaldamisala mootor tagastab selle koodi kohta tulemuse Out of scope. No Annex I scope match was found for this indexed CN code.

Kohaldamisala alus

Miks see teatmeleht annab sellise vastuse.

Koodi kirjeldus
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc)
I lisa alus
Otsene I lisa kanne puudub
Allika alus
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-hierarhia

Üle-, alam- ja lähedased read.

Teatmiku vaade on mõeldud teatmeandmetes liikumiseks. Kui soovite toiminguna kontrollida mõnda muud koodi, kasutage kontrolli tööriista.

72raud ja terasout7210flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coatedout72104100flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc)out72104110flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, plated or coated with zinc, not further worked than surface-treated, or simply cut into shapes other than square or rectangular (excl. products electrolytically plated or coated with zinc)out72104190flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, plated or coated with zinc (excl. products electrolytically plated or coated with zinc, or not further worked than surface-treated, or simply cut into shapes other than square or rectangular)out721011flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of >= 0,5 mmout721012flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of < 0,5 mmout721020flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with lead, incl. terne-plateout721030flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zincout721031flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout721039flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc (excl. products of steel of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out
Tõendite muster

Mida see ettevalmistuse jaoks tähendab.

See rida ei käivita praeguse kohaldamisala tulemuse kohaselt otseselt tõendite kogumist.

Allika metaandmed
Vajate kiiret toimingu vaadet?Kontrollige sama koodi HS-kohaldamisala kontrolli tööriistas.
Ava tööriista tulemus
721041 EUDR-i HS/KN-kohaldamisala teatmik | EUDR Tools