EUDR ToolsTasuta avalikud tööriistad ELi importijatele
HS/KN-kohaldamisala teatmik
Koodi teatmekirjeraud ja teras

Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods)

Allika kuupäevaga teatmekirje HS/KN-koodi 721710 kohta: EUDR-i kohaldamisala alus, KN-hierarhia, mõju tõenditele ja seotud indekseeritud read.

Teatmiku tüüpHS/KN-kohaldamisala kirje
Kohaldamisala otsusOut of scope
Mõju importijaleAinult teatmemärkus
KN aasta2026
Teatmevastus

HS/KN-kood 721710 on EUDR-i ettevalmistuse seisukohast kohaldamisalast väljas.

Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods) Indekseeritud kohaldamisala mootor tagastab selle koodi kohta tulemuse Out of scope. No Annex I scope match was found for this indexed CN code.

Kohaldamisala alus

Miks see teatmeleht annab sellise vastuse.

Koodi kirjeldus
Wire of iron or non-alloy steel, in coils, not plated or coated, whether or not polished (excl. bars and rods)
I lisa alus
Otsene I lisa kanne puudub
Allika alus
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-hierarhia

Üle-, alam- ja lähedased read.

Teatmiku vaade on mõeldud teatmeandmetes liikumiseks. Kui soovite toiminguna kontrollida mõnda muud koodi, kasutage kontrolli tööriista.

72raud ja terasout7217wire of iron or non-alloy steel, in coils (excl. bars and rods)out72171010wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, not plated or coated, whether or not polished, with a maximum cross-sectional dimension of < 0,8 mmout72171031wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, with indentations, ribs, grooves or other deformations produced during the rolling process, not plated or coated, with a maximum cross-sectional dimension of >= 0,8 mmout72171039wire of iron or non-alloy steel, in coils, containing by weight < 0,25% carbon, not plated or coated, with a maximum cross-sectional dimension of >= 0,8 mm (without indentations, ribs, grooves or other deformations produced during the rolling process)out72171050wire of iron or non-alloy steel, in coils, containing by weight >= 0,25% but < 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods)out72171090wire of iron or non-alloy steel, in coils, containing by weight >= 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods)out721711wire of iron or non-alloy steel, in rings or coils, containing by weight < 0,25% of carbon, not plated or coated, whether or not polished (excl. bars and rods)out721712wire of iron or non-alloy steel, in rings or coils, containing by weight < 0,25% of carbon, plated or coated with zinc (excl. bars and rods)out721713wire of iron or non-alloy steel, in rings or coils, containing by weight < 0,25% of carbon, plated or coated with base metals (excl. plated or coated with zinc, and bars and rods)out721719wire of iron or non-alloy steel, in rings or coils, containing by weight < 0,25% of carbon, plated or coated (excl. plated or coated with base metals, and bars and rods)out721720wire of iron or non-alloy steel, in coils, plated or coated with zinc (excl. bars and rods)out721721wire of iron or non-alloy steel, in reels or coils, containing by weight >= 0,25% but < 0,6% carbon, not plated or coated, whether or not polished (excl. hot-rolled bars and rods)out
Tõendite muster

Mida see ettevalmistuse jaoks tähendab.

See rida ei käivita praeguse kohaldamisala tulemuse kohaselt otseselt tõendite kogumist.

Allika metaandmed
Vajate kiiret toimingu vaadet?Kontrollige sama koodi HS-kohaldamisala kontrolli tööriistas.
Ava tööriista tulemus
721710 EUDR-i HS/KN-kohaldamisala teatmik | EUDR Tools