EUDR ToolsTasuta avalikud tööriistad ELi importijatele
HS/KN-kohaldamisala teatmik
Koodi teatmekirjeraud ja teras

Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting

Allika kuupäevaga teatmekirje HS/KN-koodi 72249031 kohta: EUDR-i kohaldamisala alus, KN-hierarhia, mõju tõenditele ja seotud indekseeritud read.

Teatmiku tüüpHS/KN-kohaldamisala kirje
Kohaldamisala otsusOut of scope
Mõju importijaleAinult teatmemärkus
KN aasta2026
Teatmevastus

HS/KN-kood 72249031 on EUDR-i ettevalmistuse seisukohast kohaldamisalast väljas.

Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting Indekseeritud kohaldamisala mootor tagastab selle koodi kohta tulemuse Out of scope. No Annex I scope match was found for this indexed CN code.

Kohaldamisala alus

Miks see teatmeleht annab sellise vastuse.

Koodi kirjeldus
Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting
I lisa alus
Otsene I lisa kanne puudub
Allika alus
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-hierarhia

Üle-, alam- ja lähedased read.

Teatmiku vaade on mõeldud teatmeandmetes liikumiseks. Kui soovite toiminguna kontrollida mõnda muud koodi, kasutage kontrolli tööriista.

72raud ja terasout7224steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting)out722490semi-finished products of alloy steel other than stainlessout72249001semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thicknessout72249002semi-finished products of tool steelout72249003semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thicknessout72249005semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thicknessout72249007semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05)out72249008semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. high-speed steel and articles of subheading 7224.90.05)out
Tõendite muster

Mida see ettevalmistuse jaoks tähendab.

See rida ei käivita praeguse kohaldamisala tulemuse kohaselt otseselt tõendite kogumist.

Allika metaandmed
Vajate kiiret toimingu vaadet?Kontrollige sama koodi HS-kohaldamisala kontrolli tööriistas.
Ava tööriista tulemus
72249031 EUDR-i HS/KN-kohaldamisala teatmik | EUDR Tools