HS/CN-koodi 721141 on soveltamisalan ulkopuolella EUDR-valmistelun kannalta.
Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than cold-rolled "cold-reduced", containing by weight < 0,25% of carbon (excl. those of a thickness < 3 mm and having a minimum yield point of 275 MPa, or of a thickness >= 3 mm and having a minimum yield point of 355 MPa) Indeksoitu soveltamisalamoottori palauttaa arvon Out of scope tälle koodille. No Annex I scope match was found for this indexed CN code.
Miksi tämä hakemistosivu antaa tämän vastauksen.
- Koodin kuvaus
- Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than cold-rolled "cold-reduced", containing by weight < 0,25% of carbon (excl. those of a thickness < 3 mm and having a minimum yield point of 275 MPa, or of a thickness >= 3 mm and having a minimum yield point of 355 MPa)
- Liite I -peruste
- Ei suoraa liite I -merkintää
- Lähdeperuste
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Yläkoodi, alakoodit ja lähirivit.
Kirjastonäkymä on tarkoitettu viitenavigointiin. Käytä tarkistinta, kun haluat suorittaa toisen koodin toimintona.
72ryhmä - rauta ja teräsout7211flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coatedout72114110flat-rolled products of iron or non-alloy steel, of a width > 500 mm and < 600 mm, not further worked than cold-rolled "cold-reduced", containing by weight < 0,25% of carbon "ecsc" (excl. those of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out72114191flat-rolled products of iron or non-alloy steel, of a width <= 500 mm, not further worked than cold-rolled "cold-reduced", containing by weight < 0,25% of carbon, in coils, intended for the manufacture of tinplate "ecsc" (excl. those of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out72114195electrical plate of iron or non-alloy steel, of a width <= 500 mm, not further worked than cold-rolled "cold-reduced", containing by weight < 0,25% of carbon (excl. those of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out72114199flat-rolled products of iron or non-alloy steel, of a width <= 500 mm, not further worked than cold-rolled "cold-reduced", containing by weight < 0,25% of carbon (excl. those in coils, intended for the manufacture of tinplate "ecsc" or of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa, and electrical plate)out721111flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a minimum yield point of 355 mpa, other than in coils, without patterns in relief "ecsc"out721112flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled of a thickness >= 4,75 mm and having a minimum yield point of 355 mpa (excl. wide flat "universal plate")out721113flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"out721114flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out721121flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a maximum yield point of < 355 mpa, other than in coils, without patterns in relief "ecsc"out
Mitä tämä tarkoittaa valmistelun kannalta.
Tämä rivi ei ole suora näytönkeruun laukaisin nykyisessä soveltamisalatuloksessa.
Regulation (EU) 2023/1115 Annex I — relevant productshaettu 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115haettu 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)haettu 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)haettu 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8haettu 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghaettu 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershaettu 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)haettu 2026-08-08