EUDR ToolsIlmaiset julkiset työkalut EU:n tuojille
HS/CN-soveltamisalakirjasto
Koodihakemistoryhmä - rauta ja teräs

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated

Lähteellä päivätty hakemisto HS/CN-koodille 721190, sen EUDR-soveltamisalan perusteelle, CN-hierarkialle, näyttövaikutuksille ja liittyville indeksoiduille riveille.

ViitetyyppiHS/CN-soveltamisalatietue
SoveltamisalapäätösOut of scope
Vaikutus maahantuojalleVain viitemuistiinpano
CN-vuosi2026
Viitevastaus

HS/CN-koodi 721190 on soveltamisalan ulkopuolella EUDR-valmistelun kannalta.

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated Indeksoitu soveltamisalamoottori palauttaa arvon Out of scope tälle koodille. No Annex I scope match was found for this indexed CN code.

Soveltamisalan peruste

Miksi tämä hakemistosivu antaa tämän vastauksen.

Koodin kuvaus
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated
Liite I -peruste
Ei suoraa liite I -merkintää
Lähdeperuste
Regulation (EU) 2023/1115 Annex I and CN 2026 index
CN-hierarkia

Yläkoodi, alakoodit ja lähirivit.

Kirjastonäkymä on tarkoitettu viitenavigointiin. Käytä tarkistinta, kun haluat suorittaa toisen koodin toimintona.

72ryhmä - rauta ja teräsout7211flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coatedout72119000flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coatedout72119011flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot-rolled or cold-rolled "cold-reduced", not plated or coated, not further worked than surface-treatedout72119019flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot-rolled or cold-rolled "cold-reduced", further worked but not plated or coated (excl. products not further worked than surface-treated)out72119020flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, perforatedout72119080flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coatednon-perforatedout72119090flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, hot-rolled or cold-rolled "cold-reduced" and further rolled and further worked but not plated or coatedout721111flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a minimum yield point of 355 mpa, other than in coils, without patterns in relief "ecsc"out721112flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled of a thickness >= 4,75 mm and having a minimum yield point of 355 mpa (excl. wide flat "universal plate")out721113flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"out721114flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out721121flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a maximum yield point of < 355 mpa, other than in coils, without patterns in relief "ecsc"out
Näyttömalli

Mitä tämä tarkoittaa valmistelun kannalta.

Tämä rivi ei ole suora näytönkeruun laukaisin nykyisessä soveltamisalatuloksessa.

Lähdemetatiedot
Tarvitsetko nopean toimintonäkymän?Suorita sama koodi HS-soveltamisalan tarkistimessa.
Avaa työkalun tulos
721190 EUDR HS/CN-soveltamisalan hakemisto | EUDR Tools