EUDR ToolsIlmaiset julkiset työkalut EU:n tuojille
HS/CN-soveltamisalakirjasto
Koodihakemistoryhmä - rauta ja teräs

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated

Lähteellä päivätty hakemisto HS/CN-koodille 7212, sen EUDR-soveltamisalan perusteelle, CN-hierarkialle, näyttövaikutuksille ja liittyville indeksoiduille riveille.

ViitetyyppiHS/CN-soveltamisalatietue
SoveltamisalapäätösOut of scope
Vaikutus maahantuojalleVain viitemuistiinpano
CN-vuosi2026
Viitevastaus

HS/CN-koodi 7212 on soveltamisalan ulkopuolella EUDR-valmistelun kannalta.

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated Indeksoitu soveltamisalamoottori palauttaa arvon Out of scope tälle koodille. No Annex I scope match was found for this indexed CN code.

Soveltamisalan peruste

Miksi tämä hakemistosivu antaa tämän vastauksen.

Koodin kuvaus
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated
Liite I -peruste
Ei suoraa liite I -merkintää
Lähdeperuste
Regulation (EU) 2023/1115 Annex I and CN 2026 index
CN-hierarkia

Yläkoodi, alakoodit ja lähirivit.

Kirjastonäkymä on tarkoitettu viitenavigointiin. Käytä tarkistinta, kun haluat suorittaa toisen koodin toimintona.

72ryhmä - rauta ja teräsout721210flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinnedout721220flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zincout721221flat-rolled products of non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout721229flat-rolled products of iron or non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc (excl. those of steel, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out721230flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned (excl. electrolytically plated or coated with zinc)out721240flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or coated with plasticsout721250flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated (excl. tinned, plated or coated with zinc, painted, varnished or coated with plastics)out721260flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", cladout7201pig iron and spiegeleisen, in pigs, blocks or other primary formsout7202ferro-alloysout7203ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar formsout7204ferrous waste and scrap; remelting scrap ingots of iron or steel (excl. slag, scale and other waste from the production of iron or steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen)out7205granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings)out7206iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203)out
Näyttömalli

Mitä tämä tarkoittaa valmistelun kannalta.

Tämä rivi ei ole suora näytönkeruun laukaisin nykyisessä soveltamisalatuloksessa.

Lähdemetatiedot
Tarvitsetko nopean toimintonäkymän?Suorita sama koodi HS-soveltamisalan tarkistimessa.
Avaa työkalun tulos
7212 EUDR HS/CN-soveltamisalan hakemisto | EUDR Tools