EUDR ToolsBesplatni javni alati za uvoznike u EU
Knjižnica HS/CN područja primjene
Referenca oznakeželjezo i čelik

Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coated

Vremenski označena referenca za HS/CN oznaku 720990, njezinu osnovu za EUDR područje primjene, CN hijerarhiju, implikacije za dokaze i povezane indeksirane redke.

Vrsta referenceZapis HS/CN područja primjene
Odluka o području primjeneOut of scope
Implikacija za uvoznikaSamo referentna bilješka
CN godina2026
Referentni odgovor

HS/CN oznaka 720990 je izvan područja primjene za EUDR pripremu.

Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coated Indeksirani motor za provjeru područja primjene za ovu oznaku vraća Out of scope. No Annex I scope match was found for this indexed CN code.

Osnova područja primjene

Zašto ova referentna stranica daje takav odgovor.

Opis oznake
Flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coated
Osnova iz Priloga I
Nema izravnog unosa u Prilogu I
Izvorna osnova
Regulation (EU) 2023/1115 Annex I and CN 2026 index
CN hijerarhija

Nadređeni, podređeni i susjedni redci.

Prikaz knjižnice služi za referentnu navigaciju. Upotrijebite provjeru kada želite pokrenuti drugu oznaku kao radnju.

72željezo i čelikout7209flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced", not clad, plated or coatedout72099000flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced", and further worked, but not clad, plated or coatedout72099010flat-rolled products of iron or non-alloy steel, cold-rolled "cold-reduced", not clad, plated or coated, not further worked than surface-treated, or simply cut into shapes other than square or rectangularout72099020flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, perforatedout72099080flat-rolled products of iron or steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, non-perforatedout72099090flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, cold-rolled "cold-reduced" and further worked, but not clad, plated or coated (excl. products cut into shapes other than square or rectangular)out720911flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled, not clad, plated or coated, of a thickness of >= 3 mm and having a minimum yield point of 355 mpa "ecsc"out720912flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness > 1 mm and < 3 mm and having a minimum yield point of 275 mpa "ecsc"out720913flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness >= 0,5 mm, and <= 1 mm and having a minimum yield point of 275 mpa "ecsc"out720914flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than cold-rolled "cold-reduced", not clad, plated or coated, of a thickness < 0,5 mm and having a minimum yield point of 275 mpa "ecsc"out720915flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of >= 3 mmout720916flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply cold-rolled "cold-reduced", not clad, plated or coated, of a thickness of > 1 mm but < 3 mmout
Obrazac dokaza

Što to znači za pripremu.

Ovaj redak nije izravan pokretač prikupljanja dokaza u trenutnom rezultatu područja primjene.

Izvorni metapodaci
Trebate brzi prikaz za radnju?Pokrenite istu oznaku u provjeri HS područja primjene.
Otvorite rezultat alata
720990 — EUDR referenca HS/CN područja primjene | EUDR Tools