EUDR ToolsBesplatni javni alati za uvoznike u EU
Knjižnica HS/CN područja primjene
Referenca oznakeželjezo i čelik

Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel)

Vremenski označena referenca za HS/CN oznaku 721491, njezinu osnovu za EUDR područje primjene, CN hijerarhiju, implikacije za dokaze i povezane indeksirane redke.

Vrsta referenceZapis HS/CN područja primjene
Odluka o području primjeneOut of scope
Implikacija za uvoznikaSamo referentna bilješka
CN godina2026
Referentni odgovor

HS/CN oznaka 721491 je izvan područja primjene za EUDR pripremu.

Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel) Indeksirani motor za provjeru područja primjene za ovu oznaku vraća Out of scope. No Annex I scope match was found for this indexed CN code.

Osnova područja primjene

Zašto ova referentna stranica daje takav odgovor.

Opis oznake
Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel)
Osnova iz Priloga I
Nema izravnog unosa u Prilogu I
Izvorna osnova
Regulation (EU) 2023/1115 Annex I and CN 2026 index
CN hijerarhija

Nadređeni, podređeni i susjedni redci.

Prikaz knjižnice služi za referentnu navigaciju. Upotrijebite provjeru kada želite pokrenuti drugu oznaku kao radnju.

72željezo i čelikout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out72149110bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel)out72149190other bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% of carbon, of rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel)out721410bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils)out721420bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling processout721430bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling)out721440other bars and rods of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721450other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721460other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out
Obrazac dokaza

Što to znači za pripremu.

Ovaj redak nije izravan pokretač prikupljanja dokaza u trenutnom rezultatu područja primjene.

Izvorni metapodaci
Trebate brzi prikaz za radnju?Pokrenite istu oznaku u provjeri HS područja primjene.
Otvorite rezultat alata
721491 — EUDR referenca HS/CN područja primjene | EUDR Tools