EUDR ToolsBesplatni javni alati za uvoznike u EU
Knjižnica HS/CN područja primjene
Referenca oznakeželjezo i čelik

Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting

Vremenski označena referenca za HS/CN oznaku 72249031, njezinu osnovu za EUDR područje primjene, CN hijerarhiju, implikacije za dokaze i povezane indeksirane redke.

Vrsta referenceZapis HS/CN područja primjene
Odluka o području primjeneOut of scope
Implikacija za uvoznikaSamo referentna bilješka
CN godina2026
Referentni odgovor

HS/CN oznaka 72249031 je izvan područja primjene za EUDR pripremu.

Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting Indeksirani motor za provjeru područja primjene za ovu oznaku vraća Out of scope. No Annex I scope match was found for this indexed CN code.

Osnova područja primjene

Zašto ova referentna stranica daje takav odgovor.

Opis oznake
Semi-finished products of steel containing by weight 0,9% to 1,15% carbon, 0,5% to 2% of chromium and, if present, <= 0,5% of molybdenum, cut into shapes other than square or rectangular, hot-rolled or obtained by continuous casting
Osnova iz Priloga I
Nema izravnog unosa u Prilogu I
Izvorna osnova
Regulation (EU) 2023/1115 Annex I and CN 2026 index
CN hijerarhija

Nadređeni, podređeni i susjedni redci.

Prikaz knjižnice služi za referentnu navigaciju. Upotrijebite provjeru kada želite pokrenuti drugu oznaku kao radnju.

72željezo i čelikout7224steel, alloy, other than stainless, in ingots or other primary forms, semi-finished products of alloy steel other than stainless (excl. waste and scrap in ingot form, and products obtained by continuous casting)out722490semi-finished products of alloy steel other than stainlessout72249001semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thicknessout72249002semi-finished products of tool steelout72249003semi-finished products of high-speed steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting the width measuring < twice the thicknessout72249005semi-finished products of steel containing by weight <= 0,7% of carbon, 0,5% to 1,2% of manganese, 0,6% to 2,3% of silicon, or of steel containing by weight >= 0,0008% of boron with any other element < the minimum content referred to in note 1 f to chapter 72, of square or rectangular cross-section, hot rolled or obtained by continuous casting, the width measuring < twice the thicknessout72249007semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. of tool steel, high-speed steel and articles of subheading 7224.90.05)out72249008semi-finished products of alloy steel other than stainless steel, of square or rectangular cross-section, hot-rolled or obtained by continuous casting, the width measuring < twice the thickness (excl. high-speed steel and articles of subheading 7224.90.05)out
Obrazac dokaza

Što to znači za pripremu.

Ovaj redak nije izravan pokretač prikupljanja dokaza u trenutnom rezultatu područja primjene.

Izvorni metapodaci
Trebate brzi prikaz za radnju?Pokrenite istu oznaku u provjeri HS područja primjene.
Otvorite rezultat alata
72249031 — EUDR referenca HS/CN područja primjene | EUDR Tools