EUDR ToolsBesplatni javni alati za uvoznike u EU
Knjižnica HS/CN područja primjene
Referenca oznakeproizvodi od željeza i čelika

Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30)

Vremenski označena referenca za HS/CN oznaku 73045983, njezinu osnovu za EUDR područje primjene, CN hijerarhiju, implikacije za dokaze i povezane indeksirane redke.

Vrsta referenceZapis HS/CN područja primjene
Odluka o području primjeneOut of scope
Implikacija za uvoznikaSamo referentna bilješka
CN godina2026
Referentni odgovor

HS/CN oznaka 73045983 je izvan područja primjene za EUDR pripremu.

Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30) Indeksirani motor za provjeru područja primjene za ovu oznaku vraća Out of scope. No Annex I scope match was found for this indexed CN code.

Osnova područja primjene

Zašto ova referentna stranica daje takav odgovor.

Opis oznake
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, of an external diameter of > 168,3 mm but <= 406,4 mm (excl. cold-drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas, and products of subheading 7304 59 30)
Osnova iz Priloga I
Nema izravnog unosa u Prilogu I
Izvorna osnova
Regulation (EU) 2023/1115 Annex I and CN 2026 index
CN hijerarhija

Nadređeni, podređeni i susjedni redci.

Prikaz knjižnice služi za referentnu navigaciju. Upotrijebite provjeru kada želite pokrenuti drugu oznaku kao radnju.

73proizvodi od željeza i čelikaout7304tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron)out730459tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil)out73045910tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel other than stainless, not cold-drawn or cold-rolled "cold-reduced", unworked, straight and of uniform wall-thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknessesout73045930tubes, pipes and hollow profiles of alloy steel (excl. stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chromium, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29)out73045931tubes, pipes and hollow profiles of alloy steel (excl. stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, of a length <= 4.5m, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of heading 7304.10, 7304.20 and 7304.59.10)out73045932tubes, pipes and hollow profiles of alloy steel (excl. stainless), seamless, of circular cross-section (not cold-drawn or cold-rolled), straight and of uniform wall-thickness, of a length <= 0,5 m, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum (excl. tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29 and 7304 59 10)out73045938tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel (excl. stainless) (not cold-drawn or cold-rolled) straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum, of a length of > 0,5 m (excl. tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29 and 7304 59 10)out73045939tubes, pipes and hollow profiles, seamless, of circular cross-section, of alloy steel (excl. stainless) (not cold-drawn or cold-rolled) straight and of uniform wall-thickness, containing by weight >= 0,9% but <= 1,15% carbon and >= 0,5% but <= 2% chrome, whether or not containing by weight <= 0,5% molybdenum, of a length of > 4,5 m (excl. tubes, pipes and hollow profiles of heading 7304.10, 7304.20 and 7304.59.10)out
Obrazac dokaza

Što to znači za pripremu.

Ovaj redak nije izravan pokretač prikupljanja dokaza u trenutnom rezultatu područja primjene.

Izvorni metapodaci
Trebate brzi prikaz za radnju?Pokrenite istu oznaku u provjeri HS područja primjene.
Otvorite rezultat alata
73045983 — EUDR referenca HS/CN područja primjene | EUDR Tools