Il codice SA/NC 7211 risulta fuori ambito per la preparazione EUDR.
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated Il motore di ambito indicizzato restituisce Out of scope per questo codice. No Annex I scope match was found for this indexed CN code.
Perché questa pagina di riferimento dà quella risposta.
- Descrizione del codice
- Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated
- Base nell'allegato I
- Nessuna voce diretta nell'allegato I
- Base della fonte
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Righe superiori, inferiori e vicine.
La vista biblioteca serve alla navigazione di riferimento. Usa il verificatore quando vuoi eseguire un altro codice come azione.
72ghisa, ferro e acciaioout721111flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a minimum yield point of 355 mpa, other than in coils, without patterns in relief "ecsc"out721112flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled of a thickness >= 4,75 mm and having a minimum yield point of 355 mpa (excl. wide flat "universal plate")out721113flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"out721114flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out721121flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a maximum yield point of < 355 mpa, other than in coils, without patterns in relief "ecsc"out721122flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, of a thickness >= 4,75 mm and having a minimum yield point < 355 mpa (excl. wide flat "universal plate")out721123flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbonout721129flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbonout721130flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout7201pig iron and spiegeleisen, in pigs, blocks or other primary formsout7202ferro-alloysout7203ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar formsout7204ferrous waste and scrap; remelting scrap ingots of iron or steel (excl. slag, scale and other waste from the production of iron or steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen)out7205granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings)out7206iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203)out
Che cosa significa per la preparazione.
Questa riga non attiva direttamente la raccolta di prove nel risultato di ambito attuale.
Regulation (EU) 2023/1115 Annex I — relevant productsconsultato il 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115consultato il 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)consultato il 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)consultato il 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8consultato il 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingconsultato il 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradersconsultato il 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)consultato il 2026-08-08