Codul SA/NC 72072051 este în afara domeniului de aplicare pentru pregătirea EUDR.
Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting Motorul de domeniu indexat returnează Out of scope pentru acest cod. No Annex I scope match was found for this indexed CN code.
De ce această pagină de referință dă acest răspuns.
- Descrierea codului
- Semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of circular or polygonal cross-section, rolled or obtained by continuous casting
- Temei în anexa I
- Fără intrare directă în anexa I
- Temeiul sursei
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Rânduri părinte, copil și învecinate.
Vizualizarea de bibliotecă este pentru navigare de referință. Folosiți verificatorul atunci când doriți să rulați un alt cod ca acțiune.
72fontă, fier și oțelout7207semi-finished products of iron or non-alloy steelout720720semi-finished products of iron or non-alloy steel containing, by weight, >= 0,25% of carbonout72072011semi-finished products, of non-alloy free-cutting steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous castingout72072015semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% but < 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel)out72072017semi-finished products of iron or non-alloy steel, containing by weight >= 0,6% carbon, of square or rectangular cross-section, the width < twice the thickness, rolled or obtained by continuous casting (excl. free-cutting steel)out72072019semi-finished products of iron or non-alloy steel, containing by weight >= 0,25% carbon, of square or rectangular cross-section, the width < twice the thickness, forgedout72072031semi-finished products of iron or non-alloy steel, containing by weight >= 0.25 % carbon, of rectangular 'other than square' cross-section and the width >= twice the thickness, rolled or obtained by continuous casting, of a thickness of >= 50 mm 'ecsc'out72072032semi-finished products of iron or non-alloy steel, containing by weight >= 0,25 of carbon, of rectangular "other than square" cross-section, the width measuring >= twice the thickness, rolled or obtained by continuous castingout
Ce înseamnă acest lucru pentru pregătire.
Acest rând nu declanșează direct colectarea de dovezi în rezultatul actual al domeniului.
Regulation (EU) 2023/1115 Annex I — relevant productspreluat la 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115preluat la 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)preluat la 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)preluat la 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8preluat la 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingpreluat la 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and traderspreluat la 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)preluat la 2026-08-08