Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of <= 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm and having a minimum yield point of 355 MPa (excl. products not further worked than surface-treated, or simply cut into shapes other than rectangular "including square" "ECSC")

Codul SA/NC 72103190 este în afara domeniului de aplicare pentru pregătirea EUDR.

Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of <= 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm and having a minimum yield point of 355 MPa (excl. products not further worked than surface-treated, or simply cut into shapes other than rectangular "including square" "ECSC") Motorul de domeniu indexat returnează Out of scope pentru acest cod. No Annex I scope match was found for this indexed CN code.

De ce această pagină de referință dă acest răspuns.

Descrierea codului

Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of <= 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm and having a minimum yield point of 355 MPa (excl. products not further worked than surface-treated, or simply cut into shapes other than rectangular "including square" "ECSC")

Temei în anexa I

Fără intrare directă în anexa I

Temeiul sursei

Regulation (EU) 2023/1115 Annex I and CN 2026 index

Rânduri părinte, copil și învecinate.

Vizualizarea de bibliotecă este pentru navigare de referință. Folosiți verificatorul atunci când doriți să rulați un alt cod ca acțiune.

Ce înseamnă acest lucru pentru pregătire.

Acest rând nu declanșează direct colectarea de dovezi în rezultatul actual al domeniului.