EUDR ToolsInstrumente publice gratuite pentru importatorii din UE
Biblioteca de domeniu SA/NC
Referință de codfontă, fier și oțel

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel)

Referință cu sursă datată pentru codul SA/NC 72145091, temeiul său de domeniu EUDR, ierarhia NC, implicațiile privind dovezile și rândurile indexate conexe.

Tip de referințăFișă de domeniu SA/NC
Decizie de domeniuOut of scope
Implicație pentru importatorDoar notă de referință
Anul NC2026
Răspuns de referință

Codul SA/NC 72145091 este în afara domeniului de aplicare pentru pregătirea EUDR.

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel) Motorul de domeniu indexat returnează Out of scope pentru acest cod. No Annex I scope match was found for this indexed CN code.

Temeiul domeniului

De ce această pagină de referință dă acest răspuns.

Descrierea codului
Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel)
Temei în anexa I
Fără intrare directă în anexa I
Temeiul sursei
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Ierarhia NC

Rânduri părinte, copil și învecinate.

Vizualizarea de bibliotecă este pentru navigare de referință. Folosiți verificatorul atunci când doriți să rulați un alt cod ca acțiune.

72fontă, fier și oțelout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out721450other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out72145010other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon, of rectangular (excl. square) cross-section rolled on four faces "ecsc" (excl. those of free-cutting steel)out72145031other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring >= 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145039other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring < 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145090other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of rectangular "including square" cross-section or of other than rectangular or circular cross-section "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145099other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is < 80 mm 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out
Modelul de dovezi

Ce înseamnă acest lucru pentru pregătire.

Acest rând nu declanșează direct colectarea de dovezi în rezultatul actual al domeniului.

Metadatele sursei
Aveți nevoie de vizualizarea rapidă de acțiune?Rulați același cod în Verificatorul de domeniu SA.
Deschideți rezultatul instrumentului
72145091 — referință EUDR de domeniu SA/NC | EUDR Tools