Codul SA/NC 730660 este în afara domeniului de aplicare pentru pregătirea EUDR.
Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel (excl. seamless, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) Motorul de domeniu indexat returnează Out of scope pentru acest cod. No Annex I scope match was found for this indexed CN code.
De ce această pagină de referință dă acest răspuns.
- Descrierea codului
- Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel (excl. seamless, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)
- Temei în anexa I
- Fără intrare directă în anexa I
- Temeiul sursei
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Rânduri părinte, copil și învecinate.
Vizualizarea de bibliotecă este pentru navigare de referință. Folosiți verificatorul atunci când doriți să rulați un alt cod ca acțiune.
73articole din fontă, din fier sau din oțelout7306tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm)out73066010tubes, pipes and hollow profiles, welded, having a non-circular cross-section, of iron or steel, with attached fittings, for gases or liquids, for civil aircraft (excl. seamless)out73066011tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel, with a wall thickness of <= 2 mm (excl. seamless)out73066019tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm (excl. seamless and of cast iron)out73066021tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel, with a wall thickness of > 2 mm (excl. seamless)out73066029tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm (excl. seamless)out73066031tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel, with a wall thickness of <= 2 mm (excl. seamless and of cast iron)out73066032tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel, with a wall thickness of <= 2 mm (excl. seamless)out73066034tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of <= 2 mm (excl. seamless and of cast iron)out73066036tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of stainless steel, with a wall thickness of > 2 mm (excl. seamless)out73066038tubes and pipes and hollow profiles, welded, of square or rectangular cross-section, of iron or steel other than stainless steel, with a wall thickness of > 2 mm (excl. seamless)out730610line pipe of a kind used for oil or gas pipelines, of iron or steel, of an external diameter of <= 406,4 mm (excl. of cast iron and seamless tubes)out730611line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mmout730619line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)out730620casing and tubing of a kind used in drilling for oil or gas, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. of cast iron and seamless tubes)out730621casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mmout730629casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)out
Ce înseamnă acest lucru pentru pregătire.
Acest rând nu declanșează direct colectarea de dovezi în rezultatul actual al domeniului.
Regulation (EU) 2023/1115 Annex I — relevant productspreluat la 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115preluat la 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)preluat la 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)preluat la 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8preluat la 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingpreluat la 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and traderspreluat la 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)preluat la 2026-08-08