HS/CN kodas 72122190 EUDR parengimui yra nepatenka į taikymo sritį.
Flat-rolled products of non-alloy steel, of a width of <= 500 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa Indeksuotas taikymo srities variklis šiam kodui grąžina Out of scope. No Annex I scope match was found for this indexed CN code.
Kodėl šis informacinis puslapis pateikia tokį atsakymą.
- Kodo aprašymas
- Flat-rolled products of non-alloy steel, of a width of <= 500 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa
- I priedo pagrindas
- Nėra tiesioginio I priedo įrašo
- Šaltinio pagrindas
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Aukštesnio, žemesnio lygio ir gretimos eilutės.
Žinyno rodinys skirtas informacinei navigacijai. Norėdami patikrinti kitą kodą kaip veiksmą, naudokite tikrintuvą.
72skirsnis - geležis ir plienas (juodieji metalai)out7212flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coatedout721221flat-rolled products of non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout72122111flat-rolled products of non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of < 3 mm and having a minimum yield point of 275 mpa or of a thickness of >= 3 mm, and having a minimum yield point of 355 mpa, not further worked than surface-treated "ecsc"out72122119flat-rolled products of non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, electrolytically plated or coated with zinc, of a thickness of < 3 mm and having a minimum yield point of 275 mpa or of a thickness of >= 3 mm, and having a minimum yield point of 355 mpa (excl. products not further worked than surface-treated "ecsc")out
Ką tai reiškia parengimui.
Ši eilutė dabartiniame taikymo srities rezultate tiesiogiai nesukelia įrodymų rinkimo.
Regulation (EU) 2023/1115 Annex I — relevant productsgauta 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115gauta 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)gauta 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)gauta 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8gauta 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinggauta 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradersgauta 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)gauta 2026-08-08