HS/KN kods 72111910 EUDR sagatavošanas nolūkā: neietilpst darbības jomā.
Flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600mm, simply hot-rolled, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm but < 4.75mm, and having a minimum yield point of 355 MPa "ECSC" (excl. universal plate) Indeksētais darbības jomas dzinējs šim kodam atgriež Out of scope. No Annex I scope match was found for this indexed CN code.
Kāpēc šī uzziņas lapa sniedz tādu atbildi.
- Koda apraksts
- Flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600mm, simply hot-rolled, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm but < 4.75mm, and having a minimum yield point of 355 MPa "ECSC" (excl. universal plate)
- I pielikuma pamats
- Nav tieša I pielikuma ieraksta
- Avota pamats
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Augstāka līmeņa, pakārtotās un tuvās rindas.
Bibliotēkas skats paredzēts uzziņu navigācijai. Izmantojiet pārbaudītāju, ja vēlaties pārbaudīt citu kodu kā darbību.
72iron and steelout7211flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coatedout721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out72111900flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out72111920flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness of < 4,75 mm (excl. "wide flats")out72111990flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply hot-rolled, not clad, plated or coated, of a thickness of < 4,75 mm (excl. "wide flats")out72111991flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply hot-rolled, of a thickness of >= 3 mm but < 4.75mm, and having a minimum yield point of 355 mpa "ecsc" (excl. universal plate)out72111999flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply hot-rolled, of a thickness of < 3 mm, and having a minimum yield point of 275 mpa "ecsc"out
Ko tas nozīmē sagatavošanai.
Pašreizējā darbības jomas rezultātā šī rinda tieši nerosina pierādījumu vākšanu.
Regulation (EU) 2023/1115 Annex I — relevant productsiegūts 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115iegūts 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)iegūts 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)iegūts 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8iegūts 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingiegūts 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradersiegūts 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)iegūts 2026-08-08