EUDR ToolsBezmaksas publiski rīki ES importētājiem
HS/KN darbības jomas bibliotēka
Koda uzziņairon and steel

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated

Ar avota datumu norādīta uzziņa par HS/KN kodu 721190, tā EUDR darbības jomas pamatu, KN hierarhiju, ietekmi uz pierādījumiem un saistītajām indeksētajām rindām.

Uzziņas veidsHS/KN darbības jomas ieraksts
Darbības jomas lēmumsOut of scope
Ietekme uz importētājuTikai uzziņas piezīme
KN gads2026
Uzziņas atbilde

HS/KN kods 721190 EUDR sagatavošanas nolūkā: neietilpst darbības jomā.

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated Indeksētais darbības jomas dzinējs šim kodam atgriež Out of scope. No Annex I scope match was found for this indexed CN code.

Darbības jomas pamats

Kāpēc šī uzziņas lapa sniedz tādu atbildi.

Koda apraksts
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated
I pielikuma pamats
Nav tieša I pielikuma ieraksta
Avota pamats
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN hierarhija

Augstāka līmeņa, pakārtotās un tuvās rindas.

Bibliotēkas skats paredzēts uzziņu navigācijai. Izmantojiet pārbaudītāju, ja vēlaties pārbaudīt citu kodu kā darbību.

72iron and steelout7211flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coatedout72119000flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coatedout72119011flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot-rolled or cold-rolled "cold-reduced", not plated or coated, not further worked than surface-treatedout72119019flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot-rolled or cold-rolled "cold-reduced", further worked but not plated or coated (excl. products not further worked than surface-treated)out72119020flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coated, perforatedout72119080flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced" and further worked, but not clad, plated or coatednon-perforatedout72119090flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, hot-rolled or cold-rolled "cold-reduced" and further rolled and further worked but not plated or coatedout721111flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a minimum yield point of 355 mpa, other than in coils, without patterns in relief "ecsc"out721112flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled of a thickness >= 4,75 mm and having a minimum yield point of 355 mpa (excl. wide flat "universal plate")out721113flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"out721114flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out721121flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a maximum yield point of < 355 mpa, other than in coils, without patterns in relief "ecsc"out
Pierādījumu modelis

Ko tas nozīmē sagatavošanai.

Pašreizējā darbības jomas rezultātā šī rinda tieši nerosina pierādījumu vākšanu.

Avota metadati
Vajadzīgs ātrās darbības skats?Pārbaudiet šo pašu kodu HS darbības jomas pārbaudītājā.
Atvērt rīka rezultātu
721190 — EUDR HS/KN darbības jomas uzziņa | EUDR Tools