EUDR ToolsBezmaksas publiski rīki ES importētājiem
HS/KN darbības jomas bibliotēka
Koda uzziņairon and steel

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight =< 0.25% carbon, of circular cross-section measuring not more than < 80 mm diameter 'ecsc' (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)

Ar avota datumu norādīta uzziņa par HS/KN kodu 72144039, tā EUDR darbības jomas pamatu, KN hierarhiju, ietekmi uz pierādījumiem un saistītajām indeksētajām rindām.

Uzziņas veidsHS/KN darbības jomas ieraksts
Darbības jomas lēmumsOut of scope
Ietekme uz importētājuTikai uzziņas piezīme
KN gads2026
Uzziņas atbilde

HS/KN kods 72144039 EUDR sagatavošanas nolūkā: neietilpst darbības jomā.

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight =< 0.25% carbon, of circular cross-section measuring not more than < 80 mm diameter 'ecsc' (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel) Indeksētais darbības jomas dzinējs šim kodam atgriež Out of scope. No Annex I scope match was found for this indexed CN code.

Darbības jomas pamats

Kāpēc šī uzziņas lapa sniedz tādu atbildi.

Koda apraksts
Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight =< 0.25% carbon, of circular cross-section measuring not more than < 80 mm diameter 'ecsc' (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)
I pielikuma pamats
Nav tieša I pielikuma ieraksta
Avota pamats
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN hierarhija

Augstāka līmeņa, pakārtotās un tuvās rindas.

Bibliotēkas skats paredzēts uzziņu navigācijai. Izmantojiet pārbaudītāju, ja vēlaties pārbaudīt citu kodu kā darbību.

72iron and steelout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out721440other bars and rods of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out72144010other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, containing by weight < 0,25% of carbon, of rectangular (excl. square) cross-section, rolled on four faces "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out72144020bars and rods of the type used for reinforced concrete, smooth, of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of square cross-section or of a cross-section other than rectangular or circular (ecsc)out72144031other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight =< 0.25% carbon, of circular cross-section measuring not more than >= 80 mm diameter 'ecsc' (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72144051bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section, of a maximum diameter of >= 80 mm (ecsc) (other than of free-cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72144059bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (ecsc) (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72144080bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (ecsc) (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out
Pierādījumu modelis

Ko tas nozīmē sagatavošanai.

Pašreizējā darbības jomas rezultātā šī rinda tieši nerosina pierādījumu vākšanu.

Avota metadati
Vajadzīgs ātrās darbības skats?Pārbaudiet šo pašu kodu HS darbības jomas pārbaudītājā.
Atvērt rīka rezultātu
72144039 — EUDR HS/KN darbības jomas uzziņa | EUDR Tools