EUDR ToolsGħodod pubbliċi b’xejn għall-importaturi tal-UE

Librerija tal-kamp ta’ applikazzjoni tal-HS/NM

Referenza tal-kodiċiħadid u azzar

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated

Referenza datata skont is-sors għall-kodiċi HS/NM 7211, il-bażi tiegħu fil-kamp ta’ applikazzjoni tal-EUDR, il-ġerarkija NM, l-implikazzjonijiet għall-evidenza, u ringieli indiċizzati relatati.

Tip ta’ referenzaRekord tal-kamp ta’ applikazzjoni tal-HS/NM

Deċiżjoni dwar il-kamp ta’ applikazzjoniOut of scope

Implikazzjoni għall-importaturNota ta’ referenza biss

Sena tan-NM2026

Tweġiba ta’ referenza

Il-kodiċi HS/NM 7211 huwa barra mill-kamp ta’ applikazzjoni għat-tħejjija għall-EUDR.

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated Il-magna indiċizzata tal-kamp ta’ applikazzjoni tagħti Out of scope għal dan il-kodiċi. No Annex I scope match was found for this indexed CN code.

Bażi tal-kamp ta’ applikazzjoni

Għaliex din il-paġna ta’ referenza tagħti dik it-tweġiba.

Deskrizzjoni tal-kodiċi: Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coated
Bażi fl-Anness I: L-ebda entrata diretta fl-Anness I
Bażi tas-sors: Regulation (EU) 2023/1115 Annex I and CN 2026 index

Ġerarkija NM

Ringieli ġenituri, subordinati u viċini.

Il-veduta tal-librerija hija għan-navigazzjoni ta’ referenza. Uża l-verifikatur meta trid tiċċekkja kodiċi ieħor bħala azzjoni.

72ħadid u azzarout 721111flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a minimum yield point of 355 mpa, other than in coils, without patterns in relief "ecsc"out721112flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled of a thickness >= 4,75 mm and having a minimum yield point of 355 mpa (excl. wide flat "universal plate")out721113flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"out721114flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out721121flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a maximum yield point of < 355 mpa, other than in coils, without patterns in relief "ecsc"out721122flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, of a thickness >= 4,75 mm and having a minimum yield point < 355 mpa (excl. wide flat "universal plate")out721123flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight < 0,25% of carbonout 721129flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbonout 721130flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout 7201pig iron and spiegeleisen, in pigs, blocks or other primary formsout 7202ferro-alloysout 7203ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar formsout 7204ferrous waste and scrap; remelting scrap ingots of iron or steel (excl. slag, scale and other waste from the production of iron or steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen)out7205granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings)out7206iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203)out

Mudell tal-evidenza

Xi jfisser dan għat-tħejjija.

Din ir-ringiela mhijiex skattatur dirett għall-ġbir tal-evidenza fir-riżultat attwali tal-kamp ta’ applikazzjoni.

Metadata tas-sors

Regulation (EU) 2023/1115 Annex I — relevant productsmiksub fi 2026-08-06 Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115miksub fi 2026-09-24 Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)miksub fi 2026-08-06 Eurostat Comext partner country codelist (CXT_FREE_ISO)miksub fi 2026-08-06 Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8miksub fi 2026-08-06 Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingmiksub fi 2026-08-06 Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradersmiksub fi 2025-12-26 Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)miksub fi 2026-08-08

Trid il-veduta rapida tal-azzjoni?Iċċekkja dan l-istess kodiċi fil-Verifikatur tal-kamp ta’ applikazzjoni tal-HS.

Iftaħ ir-riżultat tal-għodda

7211 — referenza tal-EUDR għall-kamp ta’ applikazzjoni tal-HS/NM | EUDR Tools