EUDR ToolsFerramentas públicas gratuitas para importadores da UE
Biblioteca de âmbito SH/NC
Referência de códigoferro fundido, ferro e aço

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel)

Referência com data de fonte para o código SH/NC 72145091, a sua base de âmbito EUDR, a hierarquia NC, as implicações em matéria de provas e as linhas indexadas relacionadas.

Tipo de referênciaRegisto de âmbito SH/NC
Decisão de âmbitoOut of scope
Implicação para o importadorApenas nota de referência
Ano da NC2026
Resposta de referência

Para a preparação EUDR, o código SH/NC 72145091 está classificado como fora do âmbito.

Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel) O motor de âmbito indexado devolve Out of scope para este código. No Annex I scope match was found for this indexed CN code.

Base de âmbito

Porque é que esta página de referência dá essa resposta.

Descrição do código
Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel)
Base no anexo I
Sem entrada direta no anexo I
Base da fonte
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Hierarquia NC

Linhas ascendentes, descendentes e próximas.

A vista de biblioteca destina-se à navegação de referência. Use o verificador quando quiser executar outro código como ação.

72ferro fundido, ferro e açoout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out721450other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out72145010other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon, of rectangular (excl. square) cross-section rolled on four faces "ecsc" (excl. those of free-cutting steel)out72145031other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring >= 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145039other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring < 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145090other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of rectangular "including square" cross-section or of other than rectangular or circular cross-section "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145099other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is < 80 mm 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out
Padrão de provas

O que isto significa para a preparação.

Esta linha não desencadeia diretamente a recolha de provas no resultado de âmbito atual.

Metadados das fontes
Precisa da vista de ação rápida?Execute este mesmo código no Verificador de Âmbito SH.
Abrir o resultado da ferramenta
72145091 — referência EUDR de âmbito SH/NC | EUDR Tools