EUDR ToolsInstrumente publice gratuite pentru importatorii din UE
Biblioteca de domeniu SA/NC
Referință de codfontă, fier și oțel

Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated

Referință cu sursă datată pentru codul SA/NC 7208, temeiul său de domeniu EUDR, ierarhia NC, implicațiile privind dovezile și rândurile indexate conexe.

Tip de referințăFișă de domeniu SA/NC
Decizie de domeniuOut of scope
Implicație pentru importatorDoar notă de referință
Anul NC2026
Răspuns de referință

Codul SA/NC 7208 este în afara domeniului de aplicare pentru pregătirea EUDR.

Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated Motorul de domeniu indexat returnează Out of scope pentru acest cod. No Annex I scope match was found for this indexed CN code.

Temeiul domeniului

De ce această pagină de referință dă acest răspuns.

Descrierea codului
Flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coated
Temei în anexa I
Fără intrare directă în anexa I
Temeiul sursei
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Ierarhia NC

Rânduri părinte, copil și învecinate.

Vizualizarea de bibliotecă este pentru navigare de referință. Folosiți verificatorul atunci când doriți să rulați un alt cod ca acțiune.

72fontă, fier și oțelout720810flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling processout720811flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm and having a minimum yield point of 355 mpa "ecsc"out720812flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 4,75 mm and <= 10 mm and having a minimum yield point of 355 mpaout720813flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 3 mm and <= 4,75 mm and having a minimum yield point of 355 mpaout720814flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness < 3 mm and having a minimum yield point of 275 mpaout720821flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness > 10 mm and having a minimum yield point of < 355 mpa "ecsc"out720822flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 4,75 mm and <= 10 mm and having a minimum yield point of < 355 mpaout720823flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 3 mm and < 4,75 mm and having a minimum yield point of < 355 mpaout720824flat-rolled products of iron or non-alloy steel, of a width > 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness < 3 mm and having a minimum yield point of < 275 mpaout720825flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in reliefout7201pig iron and spiegeleisen, in pigs, blocks or other primary formsout7202ferro-alloysout7203ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar formsout7204ferrous waste and scrap; remelting scrap ingots of iron or steel (excl. slag, scale and other waste from the production of iron or steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen)out7205granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings)out7206iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203)out
Modelul de dovezi

Ce înseamnă acest lucru pentru pregătire.

Acest rând nu declanșează direct colectarea de dovezi în rezultatul actual al domeniului.

Metadatele sursei
Aveți nevoie de vizualizarea rapidă de acțiune?Rulați același cod în Verificatorul de domeniu SA.
Deschideți rezultatul instrumentului
7208 — referință EUDR de domeniu SA/NC | EUDR Tools