Kód HS/CN 720837 je pre prípravu EUDR mimo rozsahu pôsobnosti.
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but < 10 mm, not pickled, without patterns in relief Indexovaný motor rozsahu pôsobnosti vracia pre tento kód Out of scope. No Annex I scope match was found for this indexed CN code.
Prečo táto referenčná stránka dáva takúto odpoveď.
- Popis kódu
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but < 10 mm, not pickled, without patterns in relief
- Základ v Prílohe I
- Žiadna priama položka v Prílohe I
- Základ zdroja
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Nadradené, podradené a susedné riadky.
Zobrazenie knižnice slúži na referenčnú navigáciu. Ak chcete spustiť ďalší kód ako akciu, použite nástroj na kontrolu.
72iron and steelout7208flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coatedout72083700flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but < 10 mm, not pickled, without patterns in reliefout72083710flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, intended for re-rollingout72083790flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm but <= 10 mm, not pickled, not intended for re-rollingout720810flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, with patterns in relief directly due to the rolling processout720811flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm and having a minimum yield point of 355 mpa "ecsc"out720812flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 4,75 mm and <= 10 mm and having a minimum yield point of 355 mpaout720813flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness >= 3 mm and <= 4,75 mm and having a minimum yield point of 355 mpaout720814flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness < 3 mm and having a minimum yield point of 275 mpaout720821flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness > 10 mm and having a minimum yield point of < 355 mpa "ecsc"out
Čo to znamená pre prípravu.
Tento riadok nie je v aktuálnom výsledku rozsahu pôsobnosti priamym spúšťačom zhromažďovania dokladov.
Regulation (EU) 2023/1115 Annex I — relevant productszískané 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115získané 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)získané 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)získané 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8získané 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingzískané 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and traderszískané 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)získané 2026-08-08