Kód HS/CN 72113050 je pre prípravu EUDR mimo rozsahu pôsobnosti.
Flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply cold-rolled, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa, containing by weight >= 0,25% but < 0,6% of carbon Indexovaný motor rozsahu pôsobnosti vracia pre tento kód Out of scope. No Annex I scope match was found for this indexed CN code.
Prečo táto referenčná stránka dáva takúto odpoveď.
- Popis kódu
- Flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply cold-rolled, of a thickness of < 3 mm and having a minimum yield point of 275 MPa or of a thickness of >= 3 mm, and having a minimum yield point of 355 MPa, containing by weight >= 0,25% but < 0,6% of carbon
- Základ v Prílohe I
- Žiadna priama položka v Prílohe I
- Základ zdroja
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Nadradené, podradené a susedné riadky.
Zobrazenie knižnice slúži na referenčnú navigáciu. Ak chcete spustiť ďalší kód ako akciu, použite nástroj na kontrolu.
72iron and steelout7211flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coatedout721130flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than cold-rolled "cold-reduced", of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout72113010flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600mm, simply cold-rolled, of a thickness of < 3 mm and having a minimum yield point of < 275 mpa or of a thickness of >= 3 mm, and having a minimum yield point of 355 mpa "ecsc"out72113031flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply cold-rolled, of a thickness of < 3 mm and having a minimum yield point of < 275 mpa or of a thickness of >= 3 mm, and having a minimum yield point of 355 mpa, containing by weight < 0,25% of carbon "electrical"out72113039flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply cold-rolled, of a thickness of < 3 mm and having a minimum yield point of 275 mpa or of a thickness of >= 3 mm, and having a minimum yield point of 355 mpa, containing by weight < 0,25% of carbon (excl. "electrical")out72113090flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply cold-rolled, of a thickness of < 3 mm and having a minimum yield point of 275 mpa or of a thickness of >= 3 mm, and having a minimum yield point of 355 mpa, containing by weight >= 0,6% of carbonout
Čo to znamená pre prípravu.
Tento riadok nie je v aktuálnom výsledku rozsahu pôsobnosti priamym spúšťačom zhromažďovania dokladov.
Regulation (EU) 2023/1115 Annex I — relevant productszískané 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115získané 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)získané 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)získané 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8získané 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingzískané 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and traderszískané 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)získané 2026-08-08