EUDR ToolsBezplatné verejné nástroje pre dovozcov do EÚ
Knižnica rozsahu pôsobnosti HS/CN
Referenčný záznamiron and steel

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated

Referenčná príručka s dátumom zdroja pre kód HS/CN 7212, jeho základ rozsahu pôsobnosti EUDR, hierarchiu CN, dôsledky pre doklady a súvisiace indexované riadky.

Typ referencieReferenčný záznam rozsahu pôsobnosti HS/CN
Rozhodnutie o rozsahu pôsobnostiOut of scope
Dôsledok pre dovozcuLen referenčná poznámka
Rok CN2026
Referenčná odpoveď

Kód HS/CN 7212 je pre prípravu EUDR mimo rozsahu pôsobnosti.

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated Indexovaný motor rozsahu pôsobnosti vracia pre tento kód Out of scope. No Annex I scope match was found for this indexed CN code.

Základ rozsahu pôsobnosti

Prečo táto referenčná stránka dáva takúto odpoveď.

Popis kódu
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated
Základ v Prílohe I
Žiadna priama položka v Prílohe I
Základ zdroja
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Hierarchia CN

Nadradené, podradené a susedné riadky.

Zobrazenie knižnice slúži na referenčnú navigáciu. Ak chcete spustiť ďalší kód ako akciu, použite nástroj na kontrolu.

72iron and steelout721210flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinnedout721220flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zincout721221flat-rolled products of non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout721229flat-rolled products of iron or non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc (excl. those of steel, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out721230flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned (excl. electrolytically plated or coated with zinc)out721240flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or coated with plasticsout721250flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated (excl. tinned, plated or coated with zinc, painted, varnished or coated with plastics)out721260flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", cladout7201pig iron and spiegeleisen, in pigs, blocks or other primary formsout7202ferro-alloysout7203ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar formsout7204ferrous waste and scrap; remelting scrap ingots of iron or steel (excl. slag, scale and other waste from the production of iron or steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen)out7205granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings)out7206iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203)out
Vzor dokladov

Čo to znamená pre prípravu.

Tento riadok nie je v aktuálnom výsledku rozsahu pôsobnosti priamym spúšťačom zhromažďovania dokladov.

Zdrojové metadáta
Potrebujete rýchly akčný pohľad?Spustite ten istý kód v kontrole rozsahu pôsobnosti HS.
Otvoriť výsledok nástroja
Referenčná príručka EUDR pre rozsah pôsobnosti HS/CN 7212 | EUDR Tools