EUDR ToolsBrezplačna javna orodja za uvoznike v EU
Knjižnica področja uporabe HS/CN
Referenca kodeželezo in jeklo

Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of < 0,5 mm

Datirana referenca za kodo HS/CN 721012, njeno podlago za področje uporabe EUDR, hierarhijo CN, posledice za dokaze in povezane indeksirane vrstice.

Vrsta referenceZapis področja uporabe HS/CN
Odločitev o področju uporabeOut of scope
Posledica za uvoznikaSamo referenčna opomba
Leto CN2026
Referenčni odgovor

Koda HS/CN 721012 je za pripravo na EUDR izven področja uporabe.

Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of < 0,5 mm Indeksirani mehanizem za področje uporabe za to kodo vrne Out of scope. No Annex I scope match was found for this indexed CN code.

Podlaga področja uporabe

Zakaj ta referenčna stran poda tak odgovor.

Opis kode
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of < 0,5 mm
Podlaga v Prilogi I
Ni neposrednega vnosa v Prilogi I
Izvorna podlaga
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Hierarhija CN

Nadrejene, podrejene in sosednje vrstice.

Pogled knjižnice je namenjen referenčni navigaciji. Ko želite kot dejanje zagnati drugo kodo, uporabite preverjevalnik.

72železo in jekloout7210flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coatedout72101211flat-rolled products of iron or non-alloy steel, tinplate, of a width of >= 600 mm and of a thickness of < 0,5 mm, hot-rolled or cold-rolled "cold-reduced", not further worked than surface-treated, or simply cut into shapes other than square or rectangularout72101219flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with tin, of a thickness of < 0,5 mm, not further worked than surface-treated, or simply cut into shapes other than square or rectangular (excl. tinplate)out72101220tinplate of iron or non-alloy steel, of a width of >= 600 mm and of a thickness of < 0,5 mm, tinned {coated with a layer of metal containing, by weight, >= 97% of tin}, not further worked than surface-treatedout72101280flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with tin, of a thickness of < 0,5 mm (excl. tinplate)out72101290flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with tin, of a thickness of < 0,5 mm, (excl. products not further worked than surface-treated, or simply cut into shapes other than square or rectangular, tinplate)out721011flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, of a thickness of >= 0,5 mmout721020flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated with lead, incl. terne-plateout721030flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zincout721031flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout721039flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc (excl. products of steel of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out721041flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled "cold-reduced", corrugated, plated or coated with zinc (excl. electrolytically plated or coated with zinc)out
Vzorec dokazov

Kaj to pomeni za pripravo.

Ta vrstica v trenutnem rezultatu področja uporabe ni neposreden sprožilec zbiranja dokazov.

Izvorni metapodatki
Potrebujete hiter pogled za ukrepanje?To isto kodo zaženite v preverjevalniku področja uporabe HS.
Odprite rezultat orodja
721012 — referenca področja uporabe HS/CN EUDR | EUDR Tools