Koda HS/CN 721114 je za pripravo na EUDR izven področja uporabe.
Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats") Indeksirani mehanizem za področje uporabe za to kodo vrne Out of scope. No Annex I scope match was found for this indexed CN code.
Zakaj ta referenčna stran poda tak odgovor.
- Opis kode
- Flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")
- Podlaga v Prilogi I
- Ni neposrednega vnosa v Prilogi I
- Izvorna podlaga
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Nadrejene, podrejene in sosednje vrstice.
Pogled knjižnice je namenjen referenčni navigaciji. Ko želite kot dejanje zagnati drugo kodo, uporabite preverjevalnik.
72železo in jekloout7211flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coatedout72111400flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out72111410flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out72111490flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out721111flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a minimum yield point of 355 mpa, other than in coils, without patterns in relief "ecsc"out721112flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled of a thickness >= 4,75 mm and having a minimum yield point of 355 mpa (excl. wide flat "universal plate")out721113flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"out721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out721121flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a maximum yield point of < 355 mpa, other than in coils, without patterns in relief "ecsc"out721122flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, of a thickness >= 4,75 mm and having a minimum yield point < 355 mpa (excl. wide flat "universal plate")out
Kaj to pomeni za pripravo.
Ta vrstica v trenutnem rezultatu področja uporabe ni neposreden sprožilec zbiranja dokazov.
Regulation (EU) 2023/1115 Annex I — relevant productspridobljeno 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115pridobljeno 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)pridobljeno 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)pridobljeno 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8pridobljeno 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingpridobljeno 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and traderspridobljeno 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)pridobljeno 2026-08-08