EUDR ToolsBrezplačna javna orodja za uvoznike v EU
Knjižnica področja uporabe HS/CN
Referenca kodeželezo in jeklo

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated

Datirana referenca za kodo HS/CN 7212, njeno podlago za področje uporabe EUDR, hierarhijo CN, posledice za dokaze in povezane indeksirane vrstice.

Vrsta referenceZapis področja uporabe HS/CN
Odločitev o področju uporabeOut of scope
Posledica za uvoznikaSamo referenčna opomba
Leto CN2026
Referenčni odgovor

Koda HS/CN 7212 je za pripravo na EUDR izven področja uporabe.

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated Indeksirani mehanizem za področje uporabe za to kodo vrne Out of scope. No Annex I scope match was found for this indexed CN code.

Podlaga področja uporabe

Zakaj ta referenčna stran poda tak odgovor.

Opis kode
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated
Podlaga v Prilogi I
Ni neposrednega vnosa v Prilogi I
Izvorna podlaga
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Hierarhija CN

Nadrejene, podrejene in sosednje vrstice.

Pogled knjižnice je namenjen referenčni navigaciji. Ko želite kot dejanje zagnati drugo kodo, uporabite preverjevalnik.

72železo in jekloout721210flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinnedout721220flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zincout721221flat-rolled products of non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout721229flat-rolled products of iron or non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc (excl. those of steel, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out721230flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned (excl. electrolytically plated or coated with zinc)out721240flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or coated with plasticsout721250flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated (excl. tinned, plated or coated with zinc, painted, varnished or coated with plastics)out721260flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", cladout7201pig iron and spiegeleisen, in pigs, blocks or other primary formsout7202ferro-alloysout7203ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94%, in lumps, pellets or similar formsout7204ferrous waste and scrap; remelting scrap ingots of iron or steel (excl. slag, scale and other waste from the production of iron or steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen)out7205granules and powders of pig iron, spiegeleisen, iron or steel (excl. granules and powders of ferro-alloys, turnings and filings of iron or steel, radioactive iron powders "isotopes" and certain low-calibre, substandard balls for ballbearings)out7206iron and non-alloy steel in ingots or other primary forms (excl. remelting scrap ingots, products obtained by continuous casting and iron of heading 7203)out
Vzorec dokazov

Kaj to pomeni za pripravo.

Ta vrstica v trenutnem rezultatu področja uporabe ni neposreden sprožilec zbiranja dokazov.

Izvorni metapodatki
Potrebujete hiter pogled za ukrepanje?To isto kodo zaženite v preverjevalniku področja uporabe HS.
Odprite rezultat orodja
7212 — referenca področja uporabe HS/CN EUDR | EUDR Tools