EUDR ToolsBrezplačna javna orodja za uvoznike v EU
Knjižnica področja uporabe HS/CN
Referenca kodeželezo in jeklo

Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of square or of other than rectangular or circular cross-section (excl. indentations, ribs, grooves or other deformations produced during the rolling process, twisted fter rolling, and of free-cutting steel)

Datirana referenca za kodo HS/CN 72149980, njeno podlago za področje uporabe EUDR, hierarhijo CN, posledice za dokaze in povezane indeksirane vrstice.

Vrsta referenceZapis področja uporabe HS/CN
Odločitev o področju uporabeOut of scope
Posledica za uvoznikaSamo referenčna opomba
Leto CN2026
Referenčni odgovor

Koda HS/CN 72149980 je za pripravo na EUDR izven področja uporabe.

Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of square or of other than rectangular or circular cross-section (excl. indentations, ribs, grooves or other deformations produced during the rolling process, twisted fter rolling, and of free-cutting steel) Indeksirani mehanizem za področje uporabe za to kodo vrne Out of scope. No Annex I scope match was found for this indexed CN code.

Podlaga področja uporabe

Zakaj ta referenčna stran poda tak odgovor.

Opis kode
Bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of square or of other than rectangular or circular cross-section (excl. indentations, ribs, grooves or other deformations produced during the rolling process, twisted fter rolling, and of free-cutting steel)
Podlaga v Prilogi I
Ni neposrednega vnosa v Prilogi I
Izvorna podlaga
Regulation (EU) 2023/1115 Annex I and CN 2026 index
Hierarhija CN

Nadrejene, podrejene in sosednje vrstice.

Pogled knjižnice je namenjen referenčni navigaciji. Ko želite kot dejanje zagnati drugo kodo, uporabite preverjevalnik.

72železo in jekloout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out721499bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excl. of rectangular {other than square} cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel)out72149910bars and rods of the type used for concrete reinforcement, smooth, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing < 0,25% of carbon, of square cross-section or of a cross-section other than rectangularout72149931bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section, of a maximum diameter of >= 80 mm (other than of free-cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72149939bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing < 0,25% of carbon, of circular cross-section of a maximum diameter of < 80 mm (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72149950bars and rods of iron or non-alloy steel, only hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon, of square cross-section or of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling)out72149961bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring >= 80 mm in diameter (excl. bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel)out72149969bars and rods of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring < 80 mm in diameter (excl. with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel)out
Vzorec dokazov

Kaj to pomeni za pripravo.

Ta vrstica v trenutnem rezultatu področja uporabe ni neposreden sprožilec zbiranja dokazov.

Izvorni metapodatki
Potrebujete hiter pogled za ukrepanje?To isto kodo zaženite v preverjevalniku področja uporabe HS.
Odprite rezultat orodja
72149980 — referenca področja uporabe HS/CN EUDR | EUDR Tools