EUDR ToolsKostnadsfria offentliga verktyg för EU-importörer
HS/KN-omfattningsbibliotek
Kodreferensjärn och stål

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon

Källdaterad referens för HS/KN-kod 721129, dess EUDR-omfattningsgrund, KN-hierarki, beviskonsekvenser och relaterade indexerade rader.

ReferenstypHS/KN-omfattningspost
OmfattningsbeslutOut of scope
Konsekvens för importörenEndast referensanteckning
KN-år2026
Referenssvar

HS/KN-kod 721129 är utanför tillämpningsområdet för EUDR-förberedelse.

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon Den indexerade omfattningsmotorn returnerar Out of scope för denna kod. No Annex I scope match was found for this indexed CN code.

Omfattningsgrund

Varför denna referenssida ger det svaret.

Kodbeskrivning
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbon
Grund i bilaga I
Ingen direkt post i bilaga I
Källgrund
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-hierarki

Överordnade, underordnade och närliggande rader.

Biblioteksvyn är till för referensnavigering. Använd kontrollen när du vill köra en annan kod som en åtgärd.

72järn och stålout7211flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", not clad, plated or coatedout72112900flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbonout72112910flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600mm, simply hot-rolled, of a thickness of < 3 mm and having a minimum yield point of < 275 mpa or of a thickness of >= 3 mm but < 4.75mm, and having a maximum yield point of < 355 mpa "ecsc" (excl. universal plate)out72112920flat-rolled products of iron or non-alloy steel, of a width of > 500 mm and < 600 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% of carbonout72112950flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,25% but < 0,6% of carbonout72112990flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply cold-rolled "cold-reduced", not clad, plated or coated, containing by weight >= 0,6% of carbonout72112991flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600mm, simply hot-rolled, of a thickness of >= 3 mm but < 4.75mm, and having a maximum yield point of < 355 mpa "ecsc" (excl. universal plate)out72112999flat-rolled products of iron or non-alloy steel, of a width of <= 500 mm, simply hot-rolled, of a thickness of < 3 mm, and having a maximum yield point of < 275 mpa "ecsc"out721111flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a minimum yield point of 355 mpa, other than in coils, without patterns in relief "ecsc"out721112flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled of a thickness >= 4,75 mm and having a minimum yield point of 355 mpa (excl. wide flat "universal plate")out721113flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as "wide flats"out721114flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. "wide flats")out721119flat-rolled products of iron or non-alloy steel, of a width < 600 mm, simply hot-rolled, not clad, plated or coated, of a thickness < 4,75 mm (excl. "wide flats")out721121flat-rolled products of iron or non-alloy steel, simply hot-rolled, rolled on four faces or in a box pass, of a width of > 150 mm but < 600mm, of a thickness of >= 4 mm and having a maximum yield point of < 355 mpa, other than in coils, without patterns in relief "ecsc"out
Bevismönster

Vad detta betyder för förberedelsen.

Denna rad utlöser inte direkt bevisinsamling i det aktuella omfattningsresultatet.

Källmetadata
Behöver du den snabba åtgärdsvyn?Kör samma kod i HS-omfattningskontrollen.
Öppna verktygsresultatet
721129 EUDR HS/KN-omfattningsreferens | EUDR Tools