EUDR ToolsKostnadsfria offentliga verktyg för EU-importörer
HS/KN-omfattningsbibliotek
Kodreferensjärn och stål

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned

Källdaterad referens för HS/KN-kod 721210, dess EUDR-omfattningsgrund, KN-hierarki, beviskonsekvenser och relaterade indexerade rader.

ReferenstypHS/KN-omfattningspost
OmfattningsbeslutOut of scope
Konsekvens för importörenEndast referensanteckning
KN-år2026
Referenssvar

HS/KN-kod 721210 är utanför tillämpningsområdet för EUDR-förberedelse.

Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned Den indexerade omfattningsmotorn returnerar Out of scope för denna kod. No Annex I scope match was found for this indexed CN code.

Omfattningsgrund

Varför denna referenssida ger det svaret.

Kodbeskrivning
Flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned
Grund i bilaga I
Ingen direkt post i bilaga I
Källgrund
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-hierarki

Överordnade, underordnade och närliggande rader.

Biblioteksvyn är till för referensnavigering. Använd kontrollen när du vill köra en annan kod som en åtgärd.

72järn och stålout7212flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coatedout72121010tinplate of iron or non-alloy steel, of a width of < 600 mm and of a thickness of < 0,5 mm, tinned {coated with a layer of metal containing, by weight, >= 97% of tin}, not further worked than surface-treatedout72121090flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled "cold-reduced", of a width of < 600 mm, tinned (excl. tinplate, not further worked than surface-treated)out72121091flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned, not further worked than surface-treated (excl. tinplate)out72121093flat-rolled products of iron or non-alloy steel, of a width of > 500 mm but < 600 mm, hot- or cold-rolled, tinned (excl. products not further worked than surface-treated)out72121099flat-rolled products of iron or non-alloy steel, hot-rolled or cold-rolled "cold-reduced", of a width of <= 500 mm, tinnedout721220flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zincout721221flat-rolled products of non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpaout721229flat-rolled products of iron or non-alloy steel, of a width < 600 mm, hot-rolled or cold-rolled "cold-reduced", electrolytically plated or coated with zinc (excl. those of steel, of a thickness < 3 mm and having a minimum yield point of 275 mpa, or of a thickness >= 3 mm and having a minimum yield point of 355 mpa)out721230flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", tinned (excl. electrolytically plated or coated with zinc)out721240flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", painted, varnished or coated with plasticsout721250flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold-reduced", plated or coated (excl. tinned, plated or coated with zinc, painted, varnished or coated with plastics)out
Bevismönster

Vad detta betyder för förberedelsen.

Denna rad utlöser inte direkt bevisinsamling i det aktuella omfattningsresultatet.

Källmetadata
Behöver du den snabba åtgärdsvyn?Kör samma kod i HS-omfattningskontrollen.
Öppna verktygsresultatet
721210 EUDR HS/KN-omfattningsreferens | EUDR Tools