HS/KN-kod 721450 är utanför tillämpningsområdet för EUDR-förberedelse.
Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ECSC" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel) Den indexerade omfattningsmotorn returnerar Out of scope för denna kod. No Annex I scope match was found for this indexed CN code.
Varför denna referenssida ger det svaret.
- Kodbeskrivning
- Other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon "ECSC" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)
- Grund i bilaga I
- Ingen direkt post i bilaga I
- Källgrund
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Överordnade, underordnade och närliggande rader.
Biblioteksvyn är till för referensnavigering. Använd kontrollen när du vill köra en annan kod som en åtgärd.
72järn och stålout7214bars and rods, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but incl. those twisted after rolling (excl. in irregularly wound coils)out72145010other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% and < 0,6% of carbon, of rectangular (excl. square) cross-section rolled on four faces "ecsc" (excl. those of free-cutting steel)out72145031other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring >= 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145039other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of circular cross-section measuring < 80 mm diameter "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145090other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,25% but < 0,6% carbon, of rectangular "including square" cross-section or of other than rectangular or circular cross-section "ecsc" (excl. such products with indentations, ribs, grooves or other deformations produced during the rolling process, and such products of free-cutting steel)out72145091other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is >= 80 mm 'ecsc' (excl. those of free-cutting steel)out72145099other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0.25% and < 0.6% of carbon, of rectangular or other (excl. square) cross-section, whose longest cross-section is < 80 mm 'ecsc' (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721410bars and rods, of iron or non-alloy steel, not further worked than forged (excl. in irregularly wound coils)out721420bars and rods, of iron or non-alloy steel, with indentations, ribs, groves or other deformations produced during the rolling processout721430bars and rods, of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling)out721440other bars and rods of non-alloy free-cutting steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight < 0,25% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721460other bars and rods of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing by weight >= 0,6% of carbon "ecsc" (excl. those containing indentations, ribs, grooves or other deformations produced during the rolling process, and free-cutting steel)out721491bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excl. containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel)out
Vad detta betyder för förberedelsen.
Denna rad utlöser inte direkt bevisinsamling i det aktuella omfattningsresultatet.
Regulation (EU) 2023/1115 Annex I — relevant productshämtad 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hämtad 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hämtad 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hämtad 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hämtad 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghämtad 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershämtad 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hämtad 2026-08-08