HS/KN-kode 72083251 er ikke omfattet til EUDR-forberedelse.
Flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a minimum yield point of 355 MPa, with patterns in relief directly due to the rolling process "ECSC" (excl. wide flats, also known as "universal plate") Den indekserede anvendelsesområde-motor returnerer Out of scope for denne kode. No Annex I scope match was found for this indexed CN code.
Hvorfor denne referenceside giver dette svar.
- Kodebeskrivelse
- Flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a minimum yield point of 355 MPa, with patterns in relief directly due to the rolling process "ECSC" (excl. wide flats, also known as "universal plate")
- Bilag I-grundlag
- Ingen direkte bilag I-post
- Kildegrundlag
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Overordnet, underordnet og nærliggende rækker.
Biblioteksvisningen er til referencenavigation. Brug tjekkeren, når du vil køre en anden kode som en handling.
72jern og stålout7208flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coatedout720832flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness > 10 mm and having a minimum yield point of 355 mpa "ecsc" (excl. wide flat "universal plate")out72083210flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm and having a minimum yield point of 355 mpa, with patterns in relief directly due to the rolling process "ecsc"out72083230flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 10 mm and having a minimum yield point of 355 mpa, with patterns in relief directly due to the rolling process "ecsc" (excl. wide flats, also known as "universal plate")out72083259flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72083291flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72083299flat-rolled products of iron or non-alloy steel, of a width of < 2050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm and having a minimum yield point of 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out
Hvad dette betyder for forberedelsen.
Denne række udløser ikke direkte indsamling af dokumentation i det aktuelle anvendelsesområde-resultat.
Regulation (EU) 2023/1115 Annex I — relevant productshentet 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hentet 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hentet 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hentet 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hentet 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghentet 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershentet 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hentet 2026-08-08