HS/KN-kode 72084230 er ikke omfattet til EUDR-forberedelse.
Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 20 mm and having a minimum yield point of > 355 MPa, without patterns in relief "ECSC" (excl. wide flats, also known as "universal plate") Den indekserede anvendelsesområde-motor returnerer Out of scope for denne kode. No Annex I scope match was found for this indexed CN code.
Hvorfor denne referenceside giver dette svar.
- Kodebeskrivelse
- Flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 20 mm and having a minimum yield point of > 355 MPa, without patterns in relief "ECSC" (excl. wide flats, also known as "universal plate")
- Bilag I-grundlag
- Ingen direkte bilag I-post
- Kildegrundlag
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Overordnet, underordnet og nærliggende rækker.
Biblioteksvisningen er til referencenavigation. Brug tjekkeren, når du vil køre en anden kode som en handling.
72jern og stålout7208flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, hot-rolled, not clad, plated or coatedout720842flat-rolled products of iron or non-alloy steel, of a width >= 600 mm, not in coils, not further worked than hot-rolled, not clad, plated or coated, of a thickness > 10 mm and having a minimum yield point of < 355 mpa "ecsc" (excl. wide flat "universal plate")out72084210flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm and having a maximum yield point of < 355 mpa, with patterns in relief directly due to the rolling process "ecsc"out72084251flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a maximum yield point of < 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72084259flat-rolled products of iron or non-alloy steel, of a width of < 2050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 15 mm but <= 20 mm and having a maximum yield point of < 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72084291flat-rolled products of iron or non-alloy steel, of a width of >= 2050 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm and having a maximum yield point of < 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out72084299flat-rolled products of iron or non-alloy steel, of a width of < 2050 mm but >= 600 mm, not in coils, simply hot-rolled, not clad, plated or coated, of a thickness of > 10 mm but <= 15 mm and having a maximum yield point of < 355 mpa, without patterns in relief "ecsc" (excl. wide flats, also known as "universal plate")out
Hvad dette betyder for forberedelsen.
Denne række udløser ikke direkte indsamling af dokumentation i det aktuelle anvendelsesområde-resultat.
Regulation (EU) 2023/1115 Annex I — relevant productshentet 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115hentet 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)hentet 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)hentet 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8hentet 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkinghentet 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradershentet 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)hentet 2026-08-08