EUDR ToolsKostenlose öffentliche Tools für EU-Importeure
HS-/KN-Geltungsbereichs-Bibliothek
Code-Referenzwaren aus eisen oder stahl

WAREN AUS EISEN ODER STAHL

Quellendatierte Referenz für den HS-/KN-Code 73: EUDR-Geltungsbereichsgrundlage, KN-Hierarchie, Auswirkungen auf die Nachweise und verwandte indexierte Zeilen.

ReferenztypHS-/KN-Geltungsbereichseintrag
Geltungsbereichs-EntscheidungOut of scope
Bedeutung für ImporteureNur Referenzhinweis
KN-Jahr2026
Referenzantwort

HS-/KN-Code 73 ist für die EUDR-Vorbereitung außerhalb des Geltungsbereichs.

WAREN AUS EISEN ODER STAHL Die indexierte Scope-Engine liefert für diesen Code das Ergebnis Out of scope. No Annex I scope match was found for this indexed CN code.

Geltungsbereichsgrundlage

Warum diese Referenzseite diese Antwort gibt.

Code-Beschreibung
WAREN AUS EISEN ODER STAHL
Anhang-I-Grundlage
Kein direkter Anhang-I-Eintrag
Quellengrundlage
Regulation (EU) 2023/1115 Annex I and CN 2026 index
KN-Hierarchie

Übergeordnete, untergeordnete und benachbarte Zeilen.

Die Bibliotheksansicht dient der Referenznavigation. Nutzen Sie die HS-Code-Prüfung, wenn Sie einen weiteren Code aktiv prüfen möchten.

7301sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steelout7302railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing railsout7303tubes, pipes and hollow profiles, of cast ironout7304tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron)out7305tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed"out7306tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm)out7307tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steelout7308structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406)out7309reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport)out7310tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of <= 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated, n.e.s.out
Nachweismuster

Was das für die Vorbereitung bedeutet.

Diese Zeile ist im aktuellen Geltungsbereichs-Ergebnis kein direkter Auslöser für die Nachweiserhebung.

Quellen-Metadaten
Sie brauchen die schnelle Aktionsansicht?Führen Sie denselben Code in der HS-Code-Prüfung aus.
Tool-Ergebnis öffnen
73 EUDR-HS-/KN-Geltungsbereichsreferenz | EUDR Tools