HS-/KN-Code 7306 ist für die EUDR-Vorbereitung außerhalb des Geltungsbereichs.
Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm) Die indexierte Scope-Engine liefert für diesen Code das Ergebnis Out of scope. No Annex I scope match was found for this indexed CN code.
Warum diese Referenzseite diese Antwort gibt.
- Code-Beschreibung
- Tubes, pipes and hollow profiles "e.g., open seam or welded, riveted or similarly closed", of iron or steel (excl. of cast iron, seamless tubes and pipes and tubes having internal and external circular cross-sections and an external diameter of > 406,4 mm)
- Anhang-I-Grundlage
- Kein direkter Anhang-I-Eintrag
- Quellengrundlage
- Regulation (EU) 2023/1115 Annex I and CN 2026 index
Übergeordnete, untergeordnete und benachbarte Zeilen.
Die Bibliotheksansicht dient der Referenznavigation. Nutzen Sie die HS-Code-Prüfung, wenn Sie einen weiteren Code aktiv prüfen möchten.
73waren aus eisen oder stahlout730610line pipe of a kind used for oil or gas pipelines, of iron or steel, of an external diameter of <= 406,4 mm (excl. of cast iron and seamless tubes)out730611line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mmout730619line pipe of a kind used for oil or gas pipelines, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)out730620casing and tubing of a kind used in drilling for oil or gas, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. of cast iron and seamless tubes)out730621casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of stainless steel, of an external diameter of <= 406,4 mmout730629casing and tubing of a kind used in drilling for oil or gas, welded, of flat-rolled products of iron or steel, of an external diameter of <= 406,4 mm (excl. products of stainless steel or of cast iron)out730630tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, or line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)out730640tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas)out730650tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)out730660tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel (excl. seamless, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)out7301sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steelout7302railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing railsout7303tubes, pipes and hollow profiles, of cast ironout7304tubes, pipes and hollow profiles, seamless, of iron or steel (excl. products of cast iron)out7305tubes and pipes, having circular cross-sections and an external diameter of > 406,4 mm, of flat-rolled products of iron or steel "e.g., welded, riveted or similarly closed"out7307tube or pipe fittings "e.g. couplings, elbows, sleeves", of iron or steelout
Was das für die Vorbereitung bedeutet.
Diese Zeile ist im aktuellen Geltungsbereichs-Ergebnis kein direkter Auslöser für die Nachweiserhebung.
Regulation (EU) 2023/1115 Annex I — relevant productsabgerufen am 2026-08-06Commission Delegated Regulation (EU) 2026/2102 amending Annex I to Regulation (EU) 2023/1115abgerufen am 2026-09-24Eurostat Comext Combined Nomenclature codelist (CXT_NC v11.0)abgerufen am 2026-08-06Eurostat Comext partner country codelist (CXT_FREE_ISO)abgerufen am 2026-08-06Eurostat Comext DS-045409 — EU trade since 1988 by HS2-4-6 and CN8abgerufen am 2026-08-06Commission Implementing Regulation (EU) 2025/1093 — country benchmarkingabgerufen am 2026-08-06Regulation (EU) 2025/2650 amending Regulation (EU) 2023/1115 as regards certain obligations of operators and tradersabgerufen am 2025-12-26Commission Implementing Regulation (EU) 2026/1565 amending Implementing Regulation (EU) 2024/3084 (EUDR information system)abgerufen am 2026-08-08